|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Fitment
DODGE RAM 1500 PICKUP 2004-2006 WITH 3.7L V6 ENGINE
Item Description
Re-engineered to address common failure points in the original design. Our Engine Oil Dipstick is differentiated by its long-lasting handle. Constructed of tough plastic, the handle won't break or separate from the rod. Now you can perform your essential routine oil checks and changes with ease.
Clear marks on the rod promise easy-to-read oil levels
O-ring seals the top of the dipstick, prohibiting oil from escaping
Application-specific direct replacement for proper fit
Brightly-colored handle makes the dipstick easy to locate under the hood
Specification
Adjustable:No
Material :Steel
Tube Included :No
Gasket or Seal Included :No
Handle Material :Polybutylene Terephthalate (pbt)
Length (In) :43.8 In.
Part Number:53021636AC
How To Use
As with the original Dealer Tool
Insert into dipstick tube until the tool bottoms out, this tool will be longer than the tube itself.
Remove and check fluid level
DO NOT leave tool inside =
the dip stick tube when finished with level check.
This Tool Enables The User To Check Transmission Fluid Level
1. Verify that the vehicle is parked on a level surface.
2. Remove dipstick tube cap.
3. Engage parking brake. Start engine and let it idle with gear selector in the park position.
4. Shift the tansmissisn lever through the gears several times with the vehidle stationary and engine iding.
5. Bring the vehicle up to operating temperature and check fluld level with engine iding. Push dipstick into transmission fill tube until itbottoms out against the transmission pan and puil out, read fluid levell.
NOTE: The dipstick will protrude from fil tube when insalled.
6. Check transmission fluid temperature using a scan tool.
NOTE: Accurate transmission fluid temperature can only be obtained by using a scan too with the transmission leverinreverse or any forward gear position.
7. The transmission dipstick has level indicator lines every 10mm. Check fluld level on dipstick; determine proper fluid levelusing the correct fluid level chart for your vehicle.
8. Adjust fluid level as necessary and recheck level.
9. Install dipstick tube cap after checking fluid level.
| Item Specifics | |
|---|---|
| Brand | gdcarpartsin |
| Manufacturer Part Number | GD162431C01 |
| Custom Bundle | No |
| Warranty | 1 Year |
| Fitment Type | Direct Replacement |
| Gasket or Seal Included | No |
| Tube Included | No |
| Modified Item | No |
| Length | 40.95 In |
| Adjustable | No |
| Placement on Vehicle | Front,Left,Right |
| Type | Engine Dipstick |
| Handle Material | PBT Plastic |
| Material | Metal |
| Total Length | 43.8" |
| Interchange Part Number | 53021636AC |
| Total Length | 43.8" |

Shop Category Delivery Help & Info Payment Policy Shipping Policy Return Policy FAQ About Us |
For DODGE RAM 1500 PICKUP 2004-2006 WITH 3.7L V6 Engine Oil Level Dipstick
Fitment DODGE RAM 1500 PICKUP 2004-2006 WITH 3.7L V6 ENGINE
Item Description Re-engineered to address common failure points in the original design. Our Engine Oil Dipstick is differentiated by its long-lasting handle. Constructed of tough plastic, the handle won't break or separate from the rod. Now you can perform your essential routine oil checks and changes with ease. Clear marks on the rod promise easy-to-read oil levels
Specification Adjustable:No Material :Steel Tube Included :No Gasket or Seal Included :No Handle Material :Polybutylene Terephthalate (pbt) Length (In) :43.8 In. Part Number:53021636AC
How To Use As with the original Dealer Tool Insert into dipstick tube until the tool bottoms out, this tool will be longer than the tube itself. Remove and check fluid level DO NOT leave tool inside = the dip stick tube when finished with level check.
This Tool Enables The User To Check Transmission Fluid Level 1. Verify that the vehicle is parked on a level surface. 2. Remove dipstick tube cap. 3. Engage parking brake. Start engine and let it idle with gear selector in the park position. 4. Shift the tansmissisn lever through the gears several times with the vehidle stationary and engine iding. 5. Bring the vehicle up to operating temperature and check fluld level with engine iding. Push dipstick into transmission fill tube until itbottoms out against the transmission pan and puil out, read fluid levell. NOTE: The dipstick will protrude from fil tube when insalled.
6. Check transmission fluid temperature using a scan tool. NOTE: Accurate transmission fluid temperature can only be obtained by using a scan too with the transmission leverinreverse or any forward gear position.
7. The transmission dipstick has level indicator lines every 10mm. Check fluld level on dipstick; determine proper fluid levelusing the correct fluid level chart for your vehicle. 8. Adjust fluid level as necessary and recheck level. 9. Install dipstick tube cap after checking fluid level.
1. Orders processed within 24 hours of payment verification. (if you want cancel orders or change address pls contact us within 6 hours after payment, or we are not responsible for shipping a replacement.)
2. Fast shipping: All our packages use USPS First Class/UPS/Fedex... Package Service
3. If you have not received your shipment within 15 days from payment, please contact!
1. If you have a defected item under warranty, you can return it with 30 days after the pruchase date.
2. All returned items must be in the original packaging and you must provide us with the shipping tracking number, specific reason for the return, and item custom lable.
3. We will refund your full winning bid amount, upon receipt of the item in its original condition and packaging with all components and accessories included, AFTER both Buyer and Seller cancel the transaction from eBay. OR, you may choose to have a replacement.
1. We strive for 100% customer satisfaction! FEEDBACK IS VERY IMPORTANT TO US.
2. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
1. We accept multiple payment methods.
2. If you want cancel orders or change address pls contact us within 6 hours after payment, or we are not responsible for shipping a replacement.
3. Payment must be received within 10 days as auction ended or order might be delayed.
1. We stand behind every product we sell.
2. We define the item as defective only if it doesn't function as described.
3. It is the buyer's responsibility to understand the item description before bidding.
4. Man-made damage by abuse or wrong operation is not covered by this warranty.
5. No product liability insurance is assumed.
All rights reserved. |
|||||||||||||||||||||||||||||||||||||||||||||||||||