Transparent Waterproof Coating Agent, 300g Jaysuing Invisible Waterproof Agent, Waterproof Insulating Sealant, Transparent Waterproof Repair Adhesive, Comes with a small brush.
Features:
【Sealant Waterproof】Efficient leakage prevention. Waterproof insulating sealant can penetrate into joints, cracks and leaks, sealing all cracked surfaces. At the same time, it forms a waterproof and protective coating in the adjacent area.
【High temperature resistance】This anti-leakage agent will not sag or drip at high temperatures in summer. Will not tear or peel off in cold winter.
【Practical construction】Apply the product directly to the surface of ceramic tiles, floor tiles, wall tiles, cement, etc. wait for the product to penetrate into the base layer. After a few minutes, when the surface is free of liquid, brush two or three times to enhance the effect.
【Long lasting effect】Waterproof sealant And it has a powerful solution with long lasting effect. After 24–48 hours, a waterproof layer can form, which becomes stronger over time.
【Transparent waterproof coating agent】All you have to do is "brush" the desired surface with glue and you're done! It immediately and effectively seals pipe holes on walls, ceilings, roofs, window sills, etc.
Construction Method - Penetration Wear Resistance
|
|
|
|
|---|---|---|---|
When the ground is wet or rainy, this product can not be used.Clean the base surface before construction to ensure that the base surface is dry and free from dirt. For the construction of a few cracks or expansion joints, If there are cracks (more than 2 mm),Non woven or polyester fabric can be used for reinforcement and repair, and then waterproof agent coating can be used. | This product does not dilute and can notbe used directly with cement and other articlesApply evenly and thinly. Each application of waterproofing adhesive need to wait for the first dry, and then the second application. | This is important: After application, Apply evenly and thinly. Each application of waterproofing adhesive need to wait for the first dry, and then the second application. | Allow 48-72 hours to dry, curing depends on temperature, humidity, and airflow.This is important: After application, Allow at least 48 hours to dry. and during this period, Make sure not to touch water for 24 hours. |
Specifications:
Material: liquid
Colour: Transparent
Volume: 300g per can
1/2x Waterproof insulating sealant 300g
1/2x Brush
