https://cdn-trendsauto-com.s3.us-east-2.amazonaws.com/etail/INV01566316.png
Trends Auto Logo

Painless 650 Standalone Engine Harness for 92-97 GM Chevy LTI 4L60E 60502

PART NUMBER: 60502
BRAND: Painless Performance Wiring

DESCRIPTION

Harness

This harness is standalone and is not intended to replace the OEM engine wiring. Standalone harnesses are intended to run the designated engine & transmission only, generally when swapped into another vehicle.

This harness is designed for 1992-1997 5.7L LT1/LT4 & 4.3L (V8) L99 engines with a 4L60E transmission, using a '94-'97 ECM. This harness will not work with ’92-’93 ECMs . These engines and transmissions were factory equipped in Camaro, Firebird, Corvette, Roadmaster, Impala and Caprice. These harnesses also include a VATS bypass module, painless part #64024. The 4L60E transmission used must be a 1994+ which utilizes a 13th pin on the transmission connector. When using either of these harnesses on a '96 or '97 engine you must replace the coil, coil output wire and knock sensor with the parts from a '92 -'95 engine. Included with this harness is an 8 circuit modular fuse block and GM color coded wires with labels for easy installation.

This standard length harness allows four feet from the back of the intake manifold to where the fuseblock and ECM mount. Perfect for those that plan to mount these components under the dash or in the glove box.

This kit includes:
• All new fuel injection harness with OEM fitment connectors and harness breakouts.
• OBDII connector, mounting bracket and check engine light.
• Vehicle Anti Theft System (VATS) bypass module
• Rubber grommet.
• Mounting hardware.
• Installation manual.

This harness also requires the following mating parts; ECM #16188051 or #88961150.

SPECIFICATIONS:

    Number of Circuits: 8 Fuses with Ignition, Fuel Pump & Air Pump Relays
    Harness Length: 4 Feet Between Engine and ECM
    Fuse Type: Blade
    Firewall Passthrough: Grommet
    Color Code Based: 1994 Camaro
    Circuit Designations: Printed Wire Tags on all Connectors and Open Ended Wires

The Fuse Block Protects The Following Circuits

    Air Pump
    Driver Side Injectors
    Dual 40 amp Ignition Relays
    ECM & Data Link Connector
    Fuel Pump, ECM, & Mass Airflow Sensor
    Heated O2 Sensors, EGR, & Canister Purge Solenoid
    Malfunction Indicator Lamp & Brake Switch
    Pass Side Injectors
    Transmission

This harness includes connections for the following components:
    Air Pump
    Air Pump Relay
    Brake Switch
    Canister Purge Solenoid
    Data Link Connector
    Distributor
    Driver/Pass Front O2 Sensors
    ECM
    EGR Valve
    Engine Coolant Temperature
    Fan #1 Relay Ground ECM Activation
    Fan #2 Relay Ground ECM Activation
    Fuel Pump
    Fuel Pump Relay
    Fuel Pump Test
    Gear Indicator Switch
    Grounds
    Idle Air Control
    Ignition Coil
    Ignition Module
    Ignition Switch Signal
    Injectors
    Intake Air Temperature Sensor
    Knock Sensors
    Malfunction Indicator Lamp
    MAP Sensor
    Mass Airflow Sensor
    Starter
    Tachometer
    Throttle Position Sensor
    Transmission
    VATS
    Vehicle Speed Sensor
    VSS Output For Speedometer

VEHICLE COMPATIBILITY