I have really enjoyed using this machine! We had to downsize a bit and I have several S350/84 setups, so sadly I had to let something go.
 It has some great features - several pulse processes, CV O2 or ArMix, gouge, and spray arc that I have used.  It has the capability to do stainless and aluminum, and a lot of things that I never got into because I didn't need it for my particular application.

It comes with:

Custom made cart on wheels (including the spool holder)
slide out compartment for holding consumables
15ft Tweco stinger
0.45 smooth drive rolls
Setup for bernard centerfire consumables(one set installed)
Gas regulator and hose
3phase push in 208V plug installed

Does not come with:

Gas bottle
Wire

The bottle securing chain quick link is a little bent so difficult to secure(see pic) - I would just screw it shut and use a quick attach carabiner,  that's what we started doing instead on our carts.

Power Wave 355M Power Source
  • Welding Processes: GMAW, GMAW-P, FCAW, SMAW, GTAW, CAC-A
  • Input Voltage: 208-230/380-400/415-460/575 V, 1 or 3 Phase, 50/60 Hz
  • Rated Output (100% Duty Cycle): 300 A at 32 V
  • Rated Output (60% Duty Cycle): 350 A at 34 V
  • Output Current Range: 5-425 A
  • Welding Modes: Constant Current (CC), Constant Voltage (CV), Constant Power, Pulse (including Pulse-On-Pulse™ and Power Mode™)
  • Efficiency: Up to 88% at rated output
  • Maximum Open Circuit Voltage: 65 V (typical for CV modes)
  • Protection Features: Overcurrent, overvoltage, thermal shutdown
  • Communication Protocol: ArcLink™ digital
Power Feed 10M Wire Feeder
  • Welding Processes: MIG, Pulsed MIG, STT®, Flux Cored, Stick, TIG, Gouging
  • Input Voltage: 40 VDC
  • Rated Output Current/Duty Cycle: 600 A at 60%
  • Wire Size Range: Solid: .025-1/16 in. (0.6-1.6 mm) High Speed / .025-3/32 in. (0.6-2.4 mm) Low Speed; Cored: .035-5/64 in. (0.9-2.0 mm) High Speed / .035-1/8 in. (0.9-3.2 mm) Low Speed
  • Wire Feed Speed Range: 75-1200 in/min (2.0-30.5 m/min) High Speed / 50-800 in/min (1.27-20.3 m/min) Low Speed
  • Control Features: Synergic CV MIG with voltage presets; Arc control (inductance or wave control); Weld sequence (preflow, run-in, start, crater, burnback, postflow); Dual Procedure/Memory (2 procedures, 6 user memories per head)
  • Trigger Options: 2-Step/4-Step; Cold Inch/Gas Purge
  • Compatibility: Power Wave® power sources; Push-pull for aluminum
  • Communication Protocol: ArcLink® digital
  • IP Rating: IP21S


If I need to ship it, I will break it down and place it on a pallet.

Sold as-is.

Feel free to make an offer!