Description:

[Wear-Resistant and Durable]

- High-quality rubber sleeve and high-strength steel wire braid 1/4" electric washer hose, rated at 4000 PSI working pressure. Suitable for professional industrial, commercial and residential purposes. Can be used in complex environments such as factories, car washes, gardens, swimming pools, driveways, gravel roads, roofs, etc.
[Universal Replacement Hose]

-US standard 3/8" end electric washer hose, comes with 2 3/8" to M22-14mm adapters, can be connected to most pressure washers and spray guns with 3/8" or M22-14mm connectors. Great pressure hose replacement for Craftsman, Simpson, Honda, Generac, Karcher, Ryobi, Troy Bilt, Champion, Excell, Dewalt, Rigid, etc.
[High Quality]

-Swivel 3/8" brass socket quick connect end to avoid kinking when replacing the pressure washer hose, rust-proof and not easily deformed. We uses a high-quality protective sleeve to protect the joint between the hose and the connector to prevent leaks from multiple bends.
[Hot Water/Cold Water & Lightweight]

The rubber high pressure washing hose is suitable for both hot and cold water use, with an operating temperature of 35?H - 212?H, making it perfect for all seasons. With an inner diameter of 1/4", this hose is much lighter than traditional rubber pressure hoses.

Usage Steps

• Preparation

  • Ensure that the high-pressure washer is turned off and disconnected from the power supply or fuel source.
  • Check that the hose and its fittings are intact to avoid leaks or ruptures.

• Connect the Hose

  • Connect one end of the hose to the water outlet of the high-pressure washer, ensuring a tight fit to prevent it from coming loose during use.
  • Attach the other end of the hose to the spray gun or other cleaning attachments, again ensuring a secure connection.

• Water Supply Preparation

  • Make sure the washer has an adequate water source, typically connected to a faucet.
  • Turn on the water supply and check that the water flows smoothly.

• Start the High-Pressure Washer

  • Start the high-pressure washer according to the manufacturer's instructions.
  • If necessary, adjust the pressure settings to suit the cleaning task.

• Using Detergent (if needed)

  • If a detergent is required, add it to the washer as per the product instructions, ensuring compatibility with the hose.

• Begin Cleaning

  • Press the trigger on the spray gun to start cleaning surfaces. Maintain an appropriate distance between the nozzle and the object being cleaned for optimal results.
  • Move the spray gun while cleaning to avoid staying in one spot too long, which can damage the surface.

• End Cleaning

  • After finishing cleaning, release the trigger on the spray gun and turn off the high-pressure washer.
  • Turn off the water source and disconnect the hose from the equipment.

• Hose Maintenance

  • After use, rinse the inside of the hose with clean water to ensure no detergent residue remains.
  • Store the hose properly, avoiding exposure to direct sunlight or extreme temperatures.

Precautions

• When using a high-pressure washer, wear protective eyewear and suitable clothing to protect yourself from spray and detergents.
• Never point the nozzle at people or animals to avoid injury.
• Regularly check the hose for wear and tear to ensure safety and performance.

• I hope these steps help you use your high-pressure washer hose safely and effectively!