【EXCELLENT BEAM PATTERN】The led headlight bulb high and low use same beam pattern as original halogen bulbs but can deliver wider and further range light on road, without any dark spots nor glare to the oncoming traffic to ensure you a safer driving.
【50,000 HOURS LIFESPAN】Whole aviation aluminum body, unique hollow-carved heat sink design, which ensures a longer lifespan of up to 5,0000 hours.
【5 MIN SIMPLE INSTALLATION】The 9005+9006 led headlight bulb can be installed within just 5 mins by simply plugging and playing. It is also IP67 waterproof, dustproof and cold resistant (-40℃ - +150℃) that you are worry free to use under all types of weather conditions.
【CAN bus-Ready for 98% Vehicles】 Our bulbs work with 98% of vehicle's computer system without error, while some sensitive models may require additional CAN bus decoder to be installed.
Product Specification
Number of Bulbs: 4
Material: Aviation Aluminum + ABS
Type: Headlight Kit
To Fit: Headlight, DRL, fog light
Bulb Color: White
Bulb Size: 9005/HB3+9006/HB4
Bulb Type: LED
LED Type: 4-Sides COB LEDs
Color Temperature: 6500K
Light Color: White
Voltage: 12-24V
Wattage: 80W(40W/Bulb)
Lumens: 12000LM(6000LM/Bulb)
Lifetime: >50,000hrs
Beam Angle: 360 degrees
Fanless: yes, no noise
Working Temperature: -40℃ - +150℃
Placement on Vehicle: Front, Left, Right
Heat Dissipation Principle: Heat Pipe Technology + Aluminum Radiator
Features: Just plug and play,Fanless
Use for: Single High or Low beam, replacement halogen, not compatible with xenon/HID
Applications: Suitable for cars, trucks, motorcycles, SUVs, ATVs, etc.
(Random delivery of new and old packaging in the box)
Install Caution
1. As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.
2. Put the vehicle into park or make sure it is securely in gear.
3. Be sure to turn off the ignition and remove the key.
4. Be careful to avoid burns, especially when turning on or off the vehicles lighting.
5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.
6. Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.
7. Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulb.