• Fitment: Cadillac XT5 2020-2023 L4 2.0L Front Right 4WD Cadillac XT5 2017-2023 V6 3.6L Front Right 4WD GMC Acadia 2020 L4 2.0L Front 4WD GMC Acadia 2017-2023 V6 3.6L Front Right 4WD
  •  
  • Position: Front Right  
  • Package Included: 1x CV Axle
  •  
  • The role of CV Axle
  • They are used to transfer power from the vehicle's transmission and differential to the wheels to propel the vehicle forward. They feature lubricated, flexible joints that allow the shaft to flex according to road conditions with minimal impact on power transmission. The joints are grease lubricated and covered with rubber boots to protect them from dust and dirt.
  •  

    • 4WD Front Right CV Axle fits 2017-2023 Cadillac XT5 GMC Acadia 4-Door 3.6L V6

    Fitment:
    Cadillac XT5 2020-2023 L4 2.0L Front Right 4WD
    Cadillac XT5 2017-2023 V6 3.6L Front Right 4WD
    GMC Acadia 2020 L4 2.0L Front 4WD
    GMC Acadia 2017-2023 V6 3.6L Front Right 4WD

     

    Position:
    Front Right
     

    Package Included:
    1x CV Axle

     

    The role of CV Axle

    They are used to transfer power from the vehicle's transmission and differential to the wheels to propel the vehicle forward. They feature lubricated, flexible joints that allow the shaft to flex according to road conditions with minimal impact on power transmission. The joints are grease lubricated and covered with rubber boots to protect them from dust and dirt.

     

    How to change CV Axle ?

    Step1. First, make sure you have purchased a driveshaft that matches your car model.

     

    Step2. Before starting, make sure your car's engine has cooled down and stopped running. Also, make sure your work area is tidy, spacious, and well-ventilated.

     

    Step3. Raise the car high enough off the ground so that you can easily access where the driveshaft is. This can be done by using a jack or car lift.

     

    Step4. Locate where the driveshaft is located, usually in the middle of the bottom of the car. It may have a protective cover that needs to be removed to access the driveshaft.

     

    Step5. Use a suitable tool (such as a wrench) to loosen the bolt or nut on the driveshaft and carefully remove the old driveshaft from the car.

     

    Step6. Clean the driveshaft socket and bearing housing to make sure no oil or other debris remains.

     

    Step7. Slide the new driveshaft into the socket on the underside of the car until it reaches the proper mounting position. Be careful not to push it in forcefully to avoid damaging the drive shaft or car parts.

     

    Step8. Use a wrench to tighten the bolt or nut on the drive shaft until it is fully seated.

     

    Step9. Check that the drive shaft is installed correctly and that it shows no signs of looseness or damage.

     

    Step10. Lower the vehicle back to the ground and perform a test drive to ensure the driveshaft is functioning properly. If there are any problems, please make adjustments in time.


    Item Specifics
    Brand hilamps
    Manufacturer Part Number 12881169
    Manufacturer Warranty 1 Year
    Quantity 1
    Fitment Type Direct Replacement
    Part Type CV Axle Assembly,CV Axle Shaft
    Surface Finish Painted
    Non-Domestic Product No
    Interchange Part Number NCV10138
    Superseded Part Number GM8472,84020567, 84263496, 84814085
    Compatible Makes Cadillac, GMC
    Model XT5, Acadia
    Year 2017-2023
    Engine L4 2.0L, V6 3.6L
    Location Front Right(Front Passenger Side)
    Note It only fits 4WD, not fits FWD.
    Note-2 The Compressed Length is 23.03 IN.

    Payment
    1.We accept any payment which can be accepted by eBay.
     
    2.Please do check the shipping address. If you want to change the shipping address, please contact us by eBay messages.
     
    3.If you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.
     
    4.Payment must be received within 10 days as auction ended or order might be delayed.
    Shipping
    1. Orders processed within 24 hours of payment verification. (if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.)
     
    2. The images shown are not the actual item and are for your reference only.
     
    3. Fast shipping: All our packages use USPS First Class/UPS/Fedex... Package Service
     
    4. If you have not received your shipment within 15 days from payment , please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction!
    Returns
    1. You have 30 days to contact us and 10 days to return it from the date it was received. If this item is in your possession more than 7 days, it is considered used and we will not issue you a refund or replacement. There are NO EXCEPTIONS!
     
    2. All returned items must be in the original packaging and you must provide us with the shipping tracking number, specific reason for the return, and item custom lable.
     
    3. We will refund your full winning bid amount, upon receipt of the item in its original condition and packaging with all components and accessories included, AFTER both Buyer and Seller cancel the transaction from eBay. OR, you may choose to have a replacement.
     
    4. Return shipping is to be paid by the Buyer.
    Feedback
    1. We maintain high standards of excellence (five stars review)and strive for 100% customer satisfaction! FEEDBACK IS VERY IMPORTANT TO US. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
     
    2. It is impossible to address issues if we do not know about them!

    Shop Category
     Store Home
     Towing Mirrors
     Sensors
     Cooling System
     Air Conditioning System
     Lamps
     Truck Bed Accessories
     CV Axle Shaft
     Alternator
     Coolant Overflow Tank
     Brake pads
     Steering Shaft
     Windshield Wiper Motor
     Strut Assemblies
     Door Handle
     Wheel Hub Bearing Assembly
     Wheel Adapters
     Window Switch
     Bumpers
     Window Regulator
     Compressor
     Window Visor
     Drive shaft
     CDI BOX
     Other
    Hot Item
    Delivery

    content_src_url

    New List Item
    Help & Info
    Payment Policy
    Shipping Policy
    Return Policy
    FAQ
    About Us
    4WD Front Right CV Axle fits 2017-2023 Cadillac XT5 GMC Acadia 4-Door 3.6L V6

    Fitment:
    Cadillac XT5 2020-2023 L4 2.0L Front Right 4WD
    Cadillac XT5 2017-2023 V6 3.6L Front Right 4WD
    GMC Acadia 2020 L4 2.0L Front 4WD
    GMC Acadia 2017-2023 V6 3.6L Front Right 4WD

     

    Position:
    Front Right
     

    Package Included:
    1x CV Axle

     

    The role of CV Axle

    They are used to transfer power from the vehicle's transmission and differential to the wheels to propel the vehicle forward. They feature lubricated, flexible joints that allow the shaft to flex according to road conditions with minimal impact on power transmission. The joints are grease lubricated and covered with rubber boots to protect them from dust and dirt.

     

    How to change CV Axle ?

    Step1. First, make sure you have purchased a driveshaft that matches your car model.

     

    Step2. Before starting, make sure your car's engine has cooled down and stopped running. Also, make sure your work area is tidy, spacious, and well-ventilated.

     

    Step3. Raise the car high enough off the ground so that you can easily access where the driveshaft is. This can be done by using a jack or car lift.

     

    Step4. Locate where the driveshaft is located, usually in the middle of the bottom of the car. It may have a protective cover that needs to be removed to access the driveshaft.

     

    Step5. Use a suitable tool (such as a wrench) to loosen the bolt or nut on the driveshaft and carefully remove the old driveshaft from the car.

     

    Step6. Clean the driveshaft socket and bearing housing to make sure no oil or other debris remains.

     

    Step7. Slide the new driveshaft into the socket on the underside of the car until it reaches the proper mounting position. Be careful not to push it in forcefully to avoid damaging the drive shaft or car parts.

     

    Step8. Use a wrench to tighten the bolt or nut on the drive shaft until it is fully seated.

     

    Step9. Check that the drive shaft is installed correctly and that it shows no signs of looseness or damage.

     

    Step10. Lower the vehicle back to the ground and perform a test drive to ensure the driveshaft is functioning properly. If there are any problems, please make adjustments in time.



    1.We accept any payment which can be accepted by eBay.
     
    2.Please do check the shipping address. If you want to change the shipping address, please contact us by eBay messages.
     
    3.If you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.
     
    4.Payment must be received within 10 days as auction ended or order might be delayed.
    1. Orders processed within 24 hours of payment verification. (if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.)
     
    2. The images shown are not the actual item and are for your reference only.
     
    3. Fast shipping: All our packages use USPS First Class/UPS/Fedex... Package Service
     
    4. If you have not received your shipment within 15 days from payment , please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction!
    1. You have 30 days to contact us and 10 days to return it from the date it was received. If this item is in your possession more than 7 days, it is considered used and we will not issue you a refund or replacement. There are NO EXCEPTIONS!
     
    2. All returned items must be in the original packaging and you must provide us with the shipping tracking number, specific reason for the return, and item custom lable.
     
    3. We will refund your full winning bid amount, upon receipt of the item in its original condition and packaging with all components and accessories included, AFTER both Buyer and Seller cancel the transaction from eBay. OR, you may choose to have a replacement.
     
    4. Return shipping is to be paid by the Buyer.
    1. We maintain high standards of excellence (five stars review)and strive for 100% customer satisfaction! FEEDBACK IS VERY IMPORTANT TO US. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
     
    2. It is impossible to address issues if we do not know about them!

    hilamps_All rights reserved.