Specification:
Note: It is strictly forbidden to connect the positive and negative poles of the brushless motor to the wrong side. If they are connected incorrectly, the drive board will be burnt out.
The Brushless motor, built-in drive board, with 100 lines of encoder feedback, equivalent to a miniature brushless motor, model 24H055M020. It adopts NSK ball bearings, rare earth medium intensity magnetic inner rotor, speed regulation with pulse frequency (1000HZ-26000HZ range is effective), can be positive and negative rotation, with electronic brakes, complete functions, is a high-end precision miniature brushless motor.
Red wire: positive power supply (+12V)
Black wire: GND
Green line: direction. Switch to CW when suspended, CCW when connected to the positive terminal.
White line: electronic brake, release when suspended, brake when connected to GND.
Blue line: Start/stop, start when connected to the positive pole, stop when disconnected
Yellow line: PWM, pulse frequency 16000HZ-26000HZ
Note:
1. the positive and negative poles of the power supply are strictly prohibited to be connected, such as wrong connection will burn the driving board.
2. The input voltage can only be controlled between DC10V-13V, which is relatively strict. It seems impossible to start beyond this range.
3. The direction line (green line) suspended is CW, according to the positive pole is CCW, but if you want to choose CCW, the direction line should be connected to the starting line, and the starting line (blue line) together with the slowest conduction or the first disconnect. Because if the power line is switched on, the driver board inside seems to be working. We don't know why.
4. The yellow line can only start the motor if the pulse frequency is input. The motor can only be started if the pulse frequency is between 16000HZ-26000HZ.
The following actual measurement uses the PWM signal to test the motor speed. This motor still has requirements for the pulse frequency of the PWM signal, the best 16000-26000HZ, and then the duty cycle can be used to control the motor speed. (Duty cycle between 0% and 90%)
1000HZ 150 RPM 40 MA
10000HZ 1500 RPM 68 MA
12000HZ 1800 RPM 75 MA
18000HZ 2700 RPM 96 MA
22000HZ 3300 RPM 108 MA
26000HZ 3900 RPM 122 MA
When the pulse rises by 1,000 HZ, the motor speeds up by 150 RPM, with remarkable precision. As for the feedback circuit wiring method we do not understand
Outer diameter of motor: 41.9MM
Motor height: 34 MM
Motor axle diameter: 6 MM (with flat 4.5MM)
Output shaft length: 16.5MM
Motor weight: 120g
Voltage: DC12V
Maximum speed: 3900 RPM
Package Including:
According to your choice.
Payment:
We accept Paypal only, It is fast, Easy and Safe.
Payment must be completed within 7 days.
PLEASE NOTE: S&H DOES NOT INCLUDE DUTIES, LOCATL TAXES OR ANY OTHER IMPORTATION FEES.
Please list your special requests (color, packages, etc.) in the PAYPAL NOTES SECTION when you make payment.
Shipping:
We Ship to Worldwide.
Orders processed within 24-48 hours of payment verification. it will take 15-25 days for delivery. but Customs will random inspection some parcel, so that's why some parcel need more than four weeks to arrive. Shipping time is only estimated and not guaranteed.
We only ship to confirmed PAYPAL addresses. Your PAYPAL address MUST MATCH your Shipping address.
Package to USA will Shipping by E-Package with Tracking Number(7-15 Days to Delived). To other Countries will shipping by Post Air Mail without tracking number(ONLY when the order is over 20USD will supply Tracking Number Shipping Way!)(15-35 Days to Delived)
Items are shipped via China Post Air Mail.
Guarantee:
Good Good quality. Buy with confidence!
If you are not satisfied when you receive your item, please return it within 7 days for a replacement or money back. Please contact me before you return it.
Not accept returning of electronic components.
Full refund after we receive our original item, Note: Return shipping is to be paid by the Buyer.
We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important to us. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
