SPECIFICATION:
* Product Name: LED Fog Lights
* Shape: Round
* Power: 54W Pair light
* Voltage: 12V
* Lumen: 5000lm Pair light
* LED Qty: 3LED*5W+1LED*12W
* Housing Material: Die-cast Aluminum
* Light Color: White
* Color Temperature: 6000K
* Operating Temperature Range: -40°C - 80°C
* Working Lifespan: Over 50, 000 hours
* Safety Rating: DOT, SAE, Waterproof
* Warranty: 3 Years
 

FEATURES:
1.DOT Compliant--The DOT-compliant fog lights guarantee your lights are Compliant in the United States Department of Transportation for use in the U.S. & Canada to secure the safety of others.
2.Durable Construction--The steady housing is made of strengthened PC lens and Die-cast aluminum that the lifespan is more than 50,000 hours which it's strong enough to deal with all kinds of bad conditions. 
3.Excellent Heat Dissipation System--Die-cast aluminum alloy housing can efficiently dissipate more heat and keep cool, make the lamp lifespan that more than 50,000hrs; IP waterproof 67 rating ensures all-weather dependability.
4.High Performance Led Chips--Super Bright, Luminous flux: 2500LM/bulb, Color Temperature is 6000K and the Life-Span Reach to 50000Hrs. Much whiter and brighter than stock halogen bulbs.
5.Easy Installation--Just Plug and Play. Complete set fog Lights are designed to simply plug into your existing wiring without any cutting or drilling.

 

FITMENT:
For 2005 2006 2007 2008 2009 2010 2011 Tacoma 
For 2004 2005 2006 Solara 
For 2008 2009 2010 2011 2012 2013 2014 2015 Sequoia 
For 2007 2008 2009 2010 2011 2012 2013Tundra 
Replaces Original (OE) Part #:116-59795, 11019097, 81210AA030, B01N455696, TO2592117  
Note: Designed to replace stock fog lights, mounting bracket not included.

 

INSTALLATION:
The installation is simple, all I needed is a 10mm socket and to remove the 3 bolts from each light, the wiring and install the new lights.
1.Closely check your existing fog light assembly.
2.Remove the wiring harness from the fog light assembly.
3.Take out the mounting screw(normally found at the back) of your old fog light assembly.(a flat-blade screwdriver is recommended)
4.Take out the fog light assembly from your automobile.
5.Get your new fog light and install it on your vehicle using the mounting screws that you removed earlier.
6.Tighten the mounting screws just enough to keep your new fog light assembly securely installed.
7.Be careful not to tighten the screws too much or they might cause damage to the assembly.
8.Get the wiring harness connected to your new fog light assembly.

These fog lights are plug- and- play. There are positive and negative wires in these connection adapters, only when you plug in the right way, these led lights will light up. If they don't light up, you could try to flip the connector 180° to find the correct negative and positive wire combination. After that, please check all wire connections again in case there is any loose.

If you have any question, just feel free to send message to us, we will help you.

 

 

PACKAGE INCLUDING:
* 2pcs LED Fog Light

 

If you are interested in our products, please mark our link. Then you can receive our special promotion information in first time. 

PushAuction