Feature:

1. It is used as a matching accessories of pressure washers, for cleaning the car, floors, walls, etc.
2. Can rinsed off those nasty dirts in your car very easily.
3. It can be directly connected with the on the pressure washer.
4. Made of high quality brass, High quality and solid, wonu0027t rust easily.
5. The foam cannon bottle combines a high pressure water mixed with detergent and air to produce thick clinging foam.
6. Spray angle can also be adjusted according to need, it is very convenient to use.
7. The foam cannon bottle combines a high pressure water mixed with detergent and air to produce thick clinging foam..Spray angle can also be adjusted according to need, it is very convenient to use.

Specification:

This is a car pressure washer, used as a matching accessories of pressure washers, for cleaning the car, floors, walls, etc. It can rinsed off those nasty dirt in your car very easily. Made of high quality brass, High quality and solid, won't rust easily. You may like it.

Features:
It is used as a matching accessories of pressure washers, for cleaning the car, floors, walls, etc.
Can rinsed off those nasty dirts in your car very easily.
It can be directly connected with the on the pressure washer.
Made of high quality brass, High quality and solid, won't rust easily.
The foam cannon bottle combines a high pressure water mixed with detergent and air to produce thick clinging foam.
Spray angle can also be adjusted according to need, it is very convenient to use.

Specifications:
Main materials: brass, nylon
Nozzle selection: 
  #1 For Nilfisk Lavor Old Type
  #2 For Lavor New Type
  #3 For Nilfisk Gerni
  #4 For Aquatak
  #5 For K
  #6 For Black&Decker 
  #7 1/4" Adapter (optional)
Rated pressure: 200BAR - 2900PSI
Allow pressure: 280BAR - 3200PSI
Internal thread: 1/4"
Maximum : 20L/min - 5.3USGpm
Highest temperature: 60℃ / 140℉
Item weight: approx. 75g / 2.65oz
Package weight: approx. 80g / 2.82oz
Item size: aprox. 10 * 2 * 2cm / 3.94 * 0.79 * 0.79in
Package size: 13 * 2 * 2cm / 5.12 * 0.79 * 0.79in

How to use:
1. Put PTFE tape on the brass tube (two threads), each thread needs 50cm PTFE tape.
2. Put the fitting / adapter with brass tube and suction tube on foam lance unit.
3. Fill fluid bottle with desired amount of shampoo.
4. Fill fluid bottle with water (for best results, use warm water, 20% shampoo + 80% water is suggested).
5. Shake the fluid bottle to mix the shampoo with water thoroughly.
6. Attach fluid bottle to foam lance unit.
7. Attach the fitting / adapter to pressure washer , and you can start playing with it. 

Note:
Please kindly note that spray bottle is not included.

Package list:
1 * Pressure Nozzle or Adapter 

Package List:

1 * Pressure Nozzle or Adapter