Original OEM OG Xbox Power Supply Foxlink Electronics FTPS-0001 for version 1.0-1.1 motherboards [100 - 120v] - TESTED
IMPORTANT! Make sure that the power supply revision matches your motherboard.
See pictures if you need help identifying.
The original Xbox motherboard needs a power supply that was designed to run it. You must know what version of the motherboard you have, and thus, what power supply will go with it. If you don't know what motherboard version you have, contact me before you buy, I'll be happy to help you figure that out.
If your original Xbox does not power on, it may not be the power supply. You may have bad caps or trace rot on the motherboard causing the issue. If you aren't sure, contact me and I would be happy to help you figure that out BEFORE you buy. Otherwise, I do not accept returns if it turns out the motherboard was the issue. FAIR WARNING!
ALL SERIAL NUMBERS ARE LOGGED AND PHOTOGRAPHED. If your item was damaged in shipping or stops working within a month or so, it is your responsibility to make sure you send back the correct part that I originally sent. I will not issue refunds if the wrong part is returned. I e-cycle any defective or damaged parts and the serial numbers have to match for the country of origin to be traceable.
I will NOT ACCEPT ANY RETURNS for any of the reasons mentioned above.
Installation instructions not provided, professional installation recommended.
How to identify your motherboard revision:
Xbox 1.0 and 1.1 Connector - The power supply connector for 1.0 and 1.1 is a single column of pins described by the following chart in the pictures. Pin 1 is the connector pin closest to the back of the Xbox.
Xbox 1.2, 1.3, 1.4, and 1.5 Connector - The power supply connector for the 1.2, 1.3, 1.4, and 1.5 Xbox is two columns. Pin 1, Column 1 being the top left pin. Pin 1, Column 2 being the top right pin. The top being the side closest to the back of the Xbox described by the following chart in the pictures.
Xbox 1.6 Connector - The connector for the 1.6 Xbox is two columns. Pin 1, Column 1 being the top left pin. Pin 1, Column 2 being the top right pin. The top being the side closest to the back of the Xbox. This is the same connector as a 1.2, 1.3, 1.4, and 1.5 Xboxes, with a different pinout.
Fast Shipping:
The power supply will be antistatic bagged. Ships out next business day.