Product description

  • Ceiling Fan Switch Model: ZE-208s. 3 Speed 4 Wire Switch with 4 Pre-Installed Wires.
  • Fan replacement part function : OFF, L-1, L-2, L-3
  • Switch Function: OFF, High, Medium, Low.
  • Switch electrical rating: 6A 125VAC – 3A 250VAC. Material: Plastic Shell and Brass Pull Chain.
  • This fan switch is compatible with Hunter, Hampton Bay, harbor breeze, Westinghouse Fans etc.

Notes:

Before rewiring any ceiling fan,turn off electrical current at source by switching off circuit breakers.

WARNING:Failure to disconnect power supply to ceiling fan may result in serious injury or death.

Zing Ear ZE-208S Wiring Instructions

1.Check wires and make sure to observe and write down what wire color from the fan is connected to what terminal number on fan switch(1,2,3,L)

2.Cut the four wires from the existing fan switch using wire stripper and set it away.

3.Strip wires around 1/2 inch.

4.Connect the Black wire (L) from the new fan switch to wire noted in step 1.

5.Connect the Red wire (1) from the new fan switch to wire noted in step 1.

6.Connect the Blue wire (2)from the new fan switch to wire noted in step 1.

7.Connect the White wire (2)from the new fan switch to wire noted in step 1.

  • Secure connection between the wires using wire connectors by twisting them clockwise
  • (Connection of wires must be tested and verified,otherwise it may result in fire hazard,electrical shock or serious injuries)

Color Codes For Fans (Your Fan Wires Color & Position May Vary)

Harbor Breeze ceiling fan:L=Black,3=Purple,2=Brown,1=Grey

Hampton Bay ceiling fan:L=Black,3=Grey,2=Brown,1=Purple

Hampton Bay ceiling fan-Alternate colors:L=Black,3=Yellow,2=Purple,1=Red

Huter ceiling fan:L=Black,3=Green,2=Brown,1=Grey

Some basket fans:L=Black(power),3=Black(not power),2=Blue,1=red

Some exhaust fans:L=Black(power),3=White,2=Brown,1=red