eBay

Product Description

Features:

COMPLETE REPAIR KIT ---- Complete replacement of the internal fittings, a complete set of everything you need to repair the tank. Ideal for integral toilets. Package Content:1 × Toilet Fill Valve;1 × Toilet Flush Valve;1 × Toilet Push Button.

DIMENSIONAL ---- Drain valve height 20cm, suitable for 22-26cm toilet inside the tank. Button diameter is 6.9cm", suitable for toilet tank cover aperture is about 5.8cm -6.8cm.

HIGH QUALITY MATERIALS ---- Made of high quality plastic and thickened stainless steel, good performance, high toughness, high temperature and corrosion resistance, longer use. suitable for use under various water pressure and water quality.

HIGH SEALING ---- Tight seal, double leakproof, external black sealing ring, built-in silicone white sealing ring, widened and thickened sealing ring, so as to be watertight.

ADAVANTAGE & DETAIL DESIGN ---- The dual flush valve provides optional full flush for powerful flushing and half flush for water-saving. that reduces your bill. Lighter pushing force, more convenient for elder and children. Anti-siphon design, built-in check valve, prevent toilet water backflow, avoid pollution of drinking water.

EASY TO INSTAL ---- More efficient and easy to install, with a complete set of maintenance accessories. All you need to do is remove the broken part and install a new replacement and you're ready to go.

Specifications:

Drain valve

Material: ABS plastic

Flush Valve Height: 20㎝

Diameter of drainage port Joint: 6.-7.2㎝

Fit for Toilet Tank: 22-26㎝

Water tank button

Main body material: ABS plastic

Button diameter: 6.9㎝

Rod length: 8㎝ (can be cut)

Fit for toilet tank cover aperture is about 5.8cm -6.8cm
WELS Registered, WaterMark Certified

Package Content:

1 × Toilet Fill Valve

1 × Toilet Flush Valve

1 × Toilet Push Button

Water inlet valve installation tutorial

Unscrew the nut under the black sealing washer and set aside.

Adjust the water inlet valve float to the appropriate inlet height.

Clean the area around the water tank seal before installation.

Place in the correct position, do not tilt.

Once in the correct position, screw on the fixing screws.

Finally, tighten the nut to complete the installation.

Drain valve installation tutorial

Measure the height of the original part in the original tank, the height of 22-26cm can be installed

Measure the size of the installation hole, the diameter is about 6-7.2cm, then you can install it.

Rotate the upper body of the drain valve and disassemble it.

Tighten the screw in the middle of the drain valve base.

Notes:

All dimensions are measured manually and there may be small deviations.

The color may have different as the difference display, Please understand.

Shipping

1.Packages are usually shipped via AUSPOST ,CourierPlease or Fastway from our warehouse in Sydney or Melbourne.Only ship within Australia.

2.All items will be despatched within 1 business days (SAT & SUN not included) after payments of purchases are cleared.

3. Post to NSW, VIC, 3-5 business days;(Sat & Sun not included.)

Post to QLD, SA, WA, TAS 4-7 business days.(Sat & Sun not included.)

Post to NT, WA 10-14 business days.(Sat & Sun not included.)

4.Express delivery is available for an extra charge. Please contact us via eBay message for details.

Terms of sales

1.In order to guarantee your satisfaction on every single shopping experience ,we offer 3 months warranty to each product unless stated in corresponding listing. Please noted terms and conditions may apply to claims of warranty.
2. Misuse of items may cause damages.This warranty does NOT cover damages caused by misuses.
3. All accessory of items will be protected as long as they are stated in the corresponding listing.
4.The claim of the warranty must be supported by visual and written evidences (photos , video, and written emails or letters to describe the defective item(s).
5.Damages caused by poor maintenance will NOT be covered by this warranty. Customers are fully liable to the maintenance and protection during the use of item.

1.Our aim is to provide Top Level Customer Service, normally so we will try our best to solve any problem.
2.If you have any questions, please feel free to email our service specialists.
3.We will reply you ASAP. If no response within 24 Hours, please check the spam in your mail box.

4. We will leave you positive feedback once we have received full payment.
5. We greatly appreciate your POSITIVE feedback. Please do NOT leave negative or neutral feedback without asking for help. Besides, PLEASE DO NOT leaves us 1, 2, 3 or 4-star Detailed Seller Ratings because they are equal to negative feedback. We believe every problem can be resolved. If you are not satisfied in any regard, please do tell us via eBay Message.