Product Description
- ▶【Wide Range Voltmeter】-DC voltage 0.1mV~1000V; AC voltage 0.1mV~750V; DC/AC current 0.1A~1000A; Resistance 0.1Ω~60MΩ; Capacitance 1Pf~99.99mf; Temperature -4~1832 ℉(-20~1000℃); Frequency 0.001hz ~9.999mhz; Duty cycle 1%~99%. (Note!!)：Press “REL” key to zeroing before measurement.
- ▶ 【 BOTH AC/DC CLAMP-ON AMMETERr】 - High resulotion, True RMS allows you get accurate measurement regardless of waveforms. Relative mode for Capacitance, DC Inrush, Zero out for lower amps measurement, data hold, max/min, auto power off, polarity and low battery indicator.
- ▶【Multifunction Avometer】The 6000 Counts True RMS Clamp Voltmeter support Data hold, Max/Min, Relative Value,Automatic shutdown, ℉/℃ conversion and Backlight LCD display gives you clear measurements in poor light conditions.Ammeters can be used for industry, electrical switches, automotive repair, laboratories, factories and home maintenance.
- ▶【Large Jaw Design】 The Clamp Meter can measure the AC Current in a conductor up to 45mm(1.7inch) without interrupting the circuit.To measure current, you need to clip the meter to one Fire wire, not the entire power cord.
- ▶【Inrush Current Meter】 Knowing the value of inrush current can help you locate a startup problem quickly, whether it's in the motor or in the starting circuit.In the AC measurement state, press the "REL" key for more than 2 seconds, the instrument enters the inrush current measurement, the jaws clamp the circuit under test, turn on the appliance, you can get the appliance on the inrush current.
- ▶ 【We’ve Got You Covered】-Convenient features: Non- Contact Voltage Detector: The DVM can check the electrical status without touching any wire，buzzer continuity, auto/manual ranging, easy to use while on work. Holdpeak provides 12 month product quality warranty and life-time technical supports.
| DC Voltage | 600mV/6V/60V/600V/1000V ± (1.5% / 1.5% of reading+ 5 digits) |
| AC Voltage (TRMS) | 600mV/6V/60V/600V/750V ± (1.5%~3.0% of reading+ 5 digits) |
| DC Current | 600A / 1000A ± (3.0%~3.5% of reading+ 10 digits) |
| AC Current | 600A / 1000A ± (3.0%~3.5% of reading+ 10 digits) |
| Resistance | 600Ω / 6kΩ / 60kΩ / 400kΩ / 6MΩ / 60MΩ ± (1.0%~2.5% of reading+ 8 / 15 digits) |
| Capacitance | 9.999nF ~ 99.99mF ± (2.5% ~ 5.0% of reading) |
| Frequency | 9.999Hz ~ 9.999MHz ± (0.5% of reading + 15 digits) |
| Duty Cycle | 1%～99%; Accuracy: ±0.5 |
| Temperature | -4～1832℉; Accuracy: 2.5% of reading + 5 digits |
- Display: 6000 counts
- Jaw Size: 1.77 inches ( 45 mm )
- Inrush Current
- Data Hold
- True RMS
- Diode Test
- Max/MIN
- NCV Detection
- AUTO Ranging
- Backlight LCD Display
- Relative Value
- Automatic shutdown
- ℉/℃ conversion
- Overload protection
Inrush Current Meter
HP-570N supports the inrush current test function, which allows you to test the peak current of electrical equipment at the moment of switching on. It is very important for the safety of the power supply network and electrical equipment.
Large diameter opening for easy use
Jaw Size 1.77 inches ( 45mm ) suitable for most jobs . Designed accord with CATIII 1000V standard . Strong protection to troubleshoot a variety of automotive and household electrical safely and accurately.
Inrush current test function
Inrush current is the maximal instantaneous input current drawn by an electrical device when first turned on. Alternating-current electric motors and transformers may draw several times their normal full-load current when first energized, for a few cycles of the input waveform. And often having inrush currents much higher than their steady-state currents, due to the charging current of the input capacitance. The selection of overcurrent-protection devices such as fuses and circuit breakers is made more complicated when high inrush currents must be tolerated.
High Temperature measure range
Temperature measure range -20℃~-1000℃(-4℉~1832℉) by test probe . ℃ / ℉ unit Selectable.
Why 570N Pro Clamp Multi-meters?
