Description Pixhawk® 4 features advanced processor technology from STMicroelectronics®, sensor technology from Bosch®, InvenSense®, and a NuttX real-time operating system, delivering incredible performance, flexibility, and reliability for controlling any autonomous vehicle. The Pixhawk 4's microcontroller has a 2MB flash memory and 512KB RAM. With the increased power and RAM resources, developers can be more productive and efficient with their development work. More complex algorithms and models can be implemented on the autopilot. High-performance, low-noise IMUs on board are designed for stabilization applications. Data-ready signals from all sensors are routed to separate interrupt and timer capture pins on the autopilot, permitting precise time-stamping of sensor data. Newly designed vibration isolations enables more accurate readings, allowing vehicles to reach better overall flight performances. The two external SPI buses and six associated chip select lines allow to add additional sensors and SPI-interfaced payload. There are total of four I2C buses, two dedicated for external use and two grouped with serial ports for GPS/Compass modules.
Note M10 GPS Requires PX4 1.14 & ArduPilot 4.3 or newer. Power module comparison chart
Technical Specifications Main FMU Processor STM32F765 - 32 Bit Arm ® Cortex® -M7, 216MHz, 2MB memory, 512KB RAM IO Processor STM32F103 - 32 Bit Arm® Cortex®-M3, 72MHz, 64KB SRAM (Current) STM32F100 - 32 Bit Arm ® Cortex® -M3, 24MHz, 8KB SRAM (Discontinued) On-board sensors Accel/Gyro: ICM-20689 Accel/Gyro: BMI055/ICM-20602 Mag: IST8310 Barometer: MS5611
Electrical Data Power module output: 4.9~5.5V Max input voltage: 6V Max current sensing: 120A USB Power Input: 4.75~5.25V Servo Rail Input: 0~36V
Mechanical Data Dimensions: 44x84x12mm Weight(plastic case): 33.3g Weight(aluminum case): 49g