■■■Product■■■
Makita TW004GRDX 40Vmax brushless impact wrench Full set
【condition】: NEW
Features
High torque tightening with a compact body
■High torque & stable tightening
Maximum tightening torque: 320N/m※1
※1, Tightening conditions: M16 high-strength bolt/3 seconds tightening.
- Equipped with a high-power brushless motor
- "Constant speed control" ensures stable tightening that is less affected by the remaining battery capacity.
(Only during tightening)
■Compact and highly durable
While the total length is 144mm, the same as Makita's 18V machine (300M・m class),
a new mechanism that is the first in its class to achieve excellent durability.
●High-strength anvil
●Double spring
●Optimal power supply system makes it strong for high-load work!
High-load continuous work volume is 1.6 times or more (compared to Makita's 18V machine)※
※40℃ environment M16 bolt continuous tightening, when using two batteries
- Two batteries can be used continuously
■Equipped with a variety of modes
Further pursuit of peace of mind and efficiency in various work sites.
● Forward/reverse auto-stop mode
For preventing nuts from falling off during continuous pre-tightening and loosening work. (3 levels each)
・Mode 1 Forward rotation: Rotation stops immediately (after impact starts): For tightening scaffolding, pre-tightening tires of light vehicles, etc.
Reverse rotation: Rotation stops immediately (after impact ends): For all applications.
Mode 2 Forward rotation: Rotation stops in about 0.5 seconds (after impact starts): For connecting automobile tires, pipes, etc.
Reverse rotation: Rotation stops in about 0.2 to 0.3 seconds (after impact ends): For preventing bolts and nuts from falling off when loosening.
Mode 3 Forward rotation: Rotation stops in about 1 second (after impact starts): For pre-tightening steel materials, bridges, etc.
Reverse rotation: Low rotation (230 min-1) (after impact ends): Does not stop.
For when you want to stop bolts and nuts at any position.
*The above uses are approximate. The content may change depending on the working conditions.
● Switch full speed mode
If you pull the trigger a little, it will rotate at full speed in one go. *
You can perform continuous work efficiently and reduce fatigue from operating the switch.
* The maximum rotation speed of the set impact force.
● 4-stage impact force switching
You can select the impact force in detail according to the work.
■ Socket fall-out prevention: C spring type
The friction of the C spring temporarily holds the socket before inserting the pin.
(Caution) Do not use sockets other than the pin type.
Be sure to insert the pin and attach the O-ring.
■ Water-proof and dust-proof protection grade: IP56*
Protects the body and parts from harsh field environments.
・Dust-proof and water-proof plastic case: IP65 (excluding the small item storage compartment.)
* Products with IP display are designed to reduce the effects of water and dust, but
it does not guarantee that they will not break down due to water or dust.
■Other features
・Square drive 12.7mm
・Battery protection circuit
・LED light
・Soft grip
・With hook
Specifications
●Square drive sq (mm): 12.7
●Tightening capacity Normal bolts: M10-M20
High strength bolts: M10-M16
●Maximum tightening torque (N・m): 320※
※Strength classification: F10T, high strength bolts when tightened for 3 seconds.
●Impact mode: Strongest / Strong / Medium / Weak
●Rotation speed (min-1) Strongest: 0-3,200
Strong: 0-2,600
Medium: 0-1,800
Weak: 0-1,000
●Impact rate (min-1) Strongest: 0-4,000
Strong: 0-3,400
Medium: 0-2,600
Weak: 0-1,800
●Voltage (V): DC 36 (40Vmax*)
※40Vmax represents the battery voltage when fully charged.
●Dimensions (L x W x H, mm): 144x86x248 (with battery installed)
●Weight (kg): 1.9 (with battery installed)
●3-axis vibration composite value (m/s2): 16.5*
※Measured based on EN60745-2-2 standard.
●Work volume per charge (approximate): Approximately 280 M16 bolts F10T tightened
(Tightening time: Approximately 1.5 seconds. Values are for reference only. Varies depending on battery charge and work conditions.)
Set includes main unit, battery: BL4025x2, charger: DC40RA, hook, and plastic case.
(Sockets sold separately.)
■■■Shipping Duration■■■
We will carefully deliver your order using packaging materials.
Currently, the shipping method is Fedex,DHL or EMS.
This will be determined by the shipping address and total weight.
If you have a preference regarding the shipping method, please let us know when ordering.
■■■Payment■■■
You can choose the payment method.
Paypal, credit card, Google Pay, etc.
We ship the item from Japan .
We usually ship the item within 5 business days of receiving payment.
We accept return the only case of unopened item package.
Import duties, taxes, and charges are not included in the item price or shipping cost.
These charges are the buyer’s responsibility.
■■■International Buyers Please Note ■■■
Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer’s responsibility.
Please check with your country’s customs office to determine what these additional costs will be prior to bidding/buying.
These charges are normally collected by the delivering freight (shipping) company or when you pick the item up – do not confuse them for additional shipping charges.
We do not mark merchandise values below value or mark items as “gifts” – US and International government regulations prohibit such behavior.