VAG AIRBAG ECU SRS MODULE B2000 FAULT CODE REPAIR SERVICE

This service is suitable only if your SRS airbag module has a B2000 internal fault code.

B2000 is an internal fault stored inside the SRS module and cannot normally be cleared using diagnostic equipment.

The B2000 fault code cannot normally be erased using standard diagnostic equipment. A replacement airbag module can be expensive and may also require coding to the vehicle.

We can repair the B2000 software fault in your original SRS airbag module and restore it to working condition, helping you avoid unnecessary replacement costs.

The price shown in this listing applies only to the part number or part numbers stated in the listing title.

The part numbers listed below are examples of other SRS modules we may also be able to help with. Please contact us to confirm compatibility, price and availability.

Common Symptoms

• Airbag light stays on.
• B2000 fault code stored in the SRS airbag module.
• Fault code cannot be cleared with diagnostic equipment.
• SRS module reports internal fault or control module fault.

If your SRS module has a different part number or you are unsure whether this service is suitable, please contact us before purchasing so we can confirm whether we can help.

To help us check your module faster, please send us the part number from your SRS airbag module. If you are unsure which number to send, please send us clear pictures of the module from both sides.

Important Information

If you or somebody else has already opened, tested or attempted to repair the airbag module, we cannot guarantee that it can still be repaired. Previous repair attempts may damage internal components and make the module impossible to repair.

If the module has been previously repaired, opened or modified, repair may not be possible.

Please contact us before purchase if the module has no communication, water damage, severe physical damage, crash data only or any other fault.

How It Works - 3 Simple Steps

1. Remove your SRS airbag module from the vehicle and make sure the part number matches the listing title.
2. Purchase this service and securely pack your SRS module. After purchase, we will send you a return form with full shipping instructions. Please complete the form and include it inside the parcel, so we can identify your item quickly and avoid any delays. If you cannot print the form, please include a handwritten note with your eBay username, return address, phone number and email address.
3. Once we receive your SRS module, we will repair the B2000 fault and dispatch it back on the same or next working day.

Internal Fault Information

Sometimes the airbag warning light can stay on even if the vehicle has not been involved in an accident. This can mean that the SRS airbag control module has developed an internal fault.

Internal faults can be caused by corrupted data, damaged hardware, electrical surges, water damage or component failure inside the module.

Replacing Your Airbag ECU

If you need to replace the airbag ECU, the safest way to find a compatible unit is to match the part number on your original module with the replacement unit. Some replacement modules may also require coding or programming to the vehicle.

Crash Data Reset Information

If your vehicle has been involved in an accident, crash data may be stored inside the SRS module. Crash data reset is a different service from B2000 internal fault repair, so please contact us if you are unsure which service you need.

SRS Module Location

On most vehicles, the SRS airbag module is located under the centre console or beneath the dashboard area and secured to the floor.

Installation Advice

Professional removal and refitting is always recommended.

Before disconnecting the SRS module, disconnect the negative battery terminal and wait several minutes before unplugging airbag connectors.