Pls contact us first before you want to return it,thank you!
Important Notice:
Our LED replaces halogen bulbs only. It does not replace HID or LED from factory.
Our LED replaces halogen bulbs only. It does not replace HID or LED from factory.
Attention:
LED bulb is low power device, the following issues may occur if you want to use LED bulb on some vehicles: Hyper Flashing, No Flashing, or Error Code. Those are NOT problems of LED bulb and NOT covered by warranty. You may simply add a set of load resistor (NOT included) to avoid those issues.can be solved with a decoder (decoder must be purchased separately)
LED bulb is low power device, the following issues may occur if you want to use LED bulb on some vehicles: Hyper Flashing, No Flashing, or Error Code. Those are NOT problems of LED bulb and NOT covered by warranty. You may simply add a set of load resistor (NOT included) to avoid those issues.can be solved with a decoder (decoder must be purchased separately)
If you need decoder, please contact our customer service for a favorable price.
Features:
-H13（High/Low Beam）+ H11 (fog light) LED replacement bulbs are engineered for superior performance, exceptional looks, and increased safety.
-Especially designed for upgrading the Headlight,Fog light,Daytime Running Light
-Bulb Size: H13（High/Low Beam）+ H11 (fog light)
-100% Brand New and High quality.
-Use Led technoloty, amazing super bright lighting
-LED Type: LED chip high power
-Application: Headlight / Fog Driving Light / Daytime Running Light
-Beam Type: High Beam / Low Beam / 360°Beam Angle
-Color Temperature: 6000K White
-Lumens: 20000 Lumens/Bulb
-Working Voltage: DC 12V to 24V
-100W/Bulb, Low Power Consumption
-No delay to light up, Faster on/off response time
-Lifespan: 30,000 working hours ,Adopt imported chips, stable quality, long service life
-Aluminum heat sink design,built-in automotive circuit to prevent electronic interference.
-The model is as the same as factory light, no need to change car wire rute,just Plug and Play, NO modification required
-Energy saving, environmental protection, Stable performance, through strict test, Use safer driving in the car
-H13（High/Low Beam）+ H11 (fog light) LED replacement bulbs are engineered for superior performance, exceptional looks, and increased safety.
-Especially designed for upgrading the Headlight,Fog light,Daytime Running Light
-Bulb Size: H13（High/Low Beam）+ H11 (fog light)
-100% Brand New and High quality.
-Use Led technoloty, amazing super bright lighting
-LED Type: LED chip high power
-Application: Headlight / Fog Driving Light / Daytime Running Light
-Beam Type: High Beam / Low Beam / 360°Beam Angle
-Color Temperature: 6000K White
-Lumens: 20000 Lumens/Bulb
-Working Voltage: DC 12V to 24V
-100W/Bulb, Low Power Consumption
-No delay to light up, Faster on/off response time
-Lifespan: 30,000 working hours ,Adopt imported chips, stable quality, long service life
-Aluminum heat sink design,built-in automotive circuit to prevent electronic interference.
-The model is as the same as factory light, no need to change car wire rute,just Plug and Play, NO modification required
-Energy saving, environmental protection, Stable performance, through strict test, Use safer driving in the car
Fitment system may not be 100% accurate, if you are not sure which bulb size you need, please check vehicle manual or stock bulb model.
Package Includes :
BRAND NEW 4PC
H13（High/Low Beam）+ H11 (fog light) LED Bulbs 6000K White
New and old packaging will be shipped randomly
WARNING ABOUT POLARITY
Unlike halogen bulbs, LED are polarity sensitive.
BEFORE you start your LED kit installation, verify the polarity on your vehicle by simply plugging the LED bulb into your vehicle socket.
- if your light turns on, please proceed to install both bulbs onto your vehicle.
- if your light DOES NOT turn on, disconnect the bulb and flip the socket in order to reverse the polarity (this will not damage your vehicle electrical system in any way). Once you made sure the LED bulb turns on, please proceed to install both bulbs onto your vehicle.
Note: There is no convention when it comes to polarity. Different car manufactures have different polarity setup, even within the car model the polarity setup on your low beams and high beams might be different.
Unlike halogen bulbs, LED are polarity sensitive.
BEFORE you start your LED kit installation, verify the polarity on your vehicle by simply plugging the LED bulb into your vehicle socket.
- if your light turns on, please proceed to install both bulbs onto your vehicle.
- if your light DOES NOT turn on, disconnect the bulb and flip the socket in order to reverse the polarity (this will not damage your vehicle electrical system in any way). Once you made sure the LED bulb turns on, please proceed to install both bulbs onto your vehicle.
Note: There is no convention when it comes to polarity. Different car manufactures have different polarity setup, even within the car model the polarity setup on your low beams and high beams might be different.
On Apr 2, 2025 at 08:33:34 PDT, seller added the following information: