Mount for DJI O4 Pro,

Air unit lite (with axislfying camera and vtx protector)

and a fan

You can mount the base on multiple models and move the system from model-to-model using a simple USB-C connector.

I would recommend adding a patch of velcro between the bottom plate and the top plate, if you use the mounting screw to affix the inlay (optional) to the model, then offset that hole in the velcro to avoid uneven fitment of the VTX. Get a quality rubber band to help secure the VTX to the bottom plate. (optional)

The USB C hole on the bottom section is purposefully super-tight given it will get lots of use, you may need to file a little away after printing to avoid cracking the print.

If you add M2 nutserts to the bottom (optional), be sure to pre-run the screw before melting in to avoid getting in the filament into the hole, let it cool completely before removing the screw.

*Added mount to support the Air Unit LITE when using the axisflying camera and vtx protection/heatsink.

Designed by tekmunki1980 and made in the USA. CC BY-SA 3.0