Red Line Oil 80402 Synthetic High-Performance CV-2 Grease w/ Red Moly, 14 oz
BRAND: Red Line Oil
DESCRIPTION
Synthetic High-Performance CV-2 Grease w/ Red Moly, 14 oz tube
CV-2 GREASE
- Outperforms the best conventional or synthetic greases and lubes
- Withstands extreme temperature and pressure in wheel bearings, U-joints and high-angle CV Joints
- Excellent high-temp stability, extreme-pressure protection and water resistance
- Used in a variety of applications with operating temps from -100 Fahrenheit to 500 Fahrenheit
- Strong resistance to oxidation and corrosion, low evaporation and oil separation with a minimum effect on rubber seals
- Contains an organic moly for chassis lubrication and high temp/high speed industrial equipment
- Synthetic fluidity allows increases in bearing life up to 200%
- Will darken after high-temp use-not detrimental to performance
Product Details
These fluids are offered in a variety of packaging for convenience in different work environments
- Used by many of the best engine builders, engineers, and technicians in Formula 1, GP2, Formula 3, NASCAR, NHRA, and WRC
OEM Compatability
| Lubricant | 4-Ball Wear (ASTM D-417B) | Load/Wear Index (ASTM D-2783) |
|---|---|---|
| Red Line CV-2 | 0.46 | 71.1 |
| Syn Grease - M | 0.50 | 41.9 |
| Syn Moly Grease-A | 0.78 | 38.4 |
| GM Wheel Bearing Grease | 0.71 | 36.6 |
- Lubricant 4-Ball Weld Drop Point
- (ASTM D-2783)
- Red Line CV-2 400 Kg >800 Fahrenheit
- Syn Grease - M 2 200 Kg 485 Fahrenheit
- Syn Moly Grease - A 315 Kg 515 Fahrenheit
- GM Wheel Bearing Grease 250 Kg 525 Fahrenheit
- PROPERTY CV-2 GREASE
- NLGI Grade #2
- NLGI Service GC-LB
- Thickener Non-Soap
- Fluid Type Thermally-stable synthetic
- Useful Temperature Range -100 Fahrenheit to 500 Fahrenheit
- Color Red
- Dropping Point, >800 Fahrenheit
- Load Wear Index 71.2
- 4-Ball Wear Scar Diameter (Red), 40 Kg 0.46 mm
- Water Washout at 105 Fahrenheit 1%
- Evaporation Loss, 22 hrs at 350 Fahrenheit 4%
- Oil Separation, 30 hrs at 350 Fahrenheit 5%
- Oxidation Stability, 500 hrs at 210 Fahrenheit, psi 12
- Rust Test, ASTM D1743 Pass
Red Line CV-2 Grease is designed to withstand the extreme temperatures and pressures which occur in high-performance wheel bearings and CV-joints.
The excellent high temperature stability, extreme-pressure protection and water resistance enables it to out-perform even the best conventional or synthetic greases.
Red Line CV-2 Grease can be used in a wide range of applications at temperatures ranging between -100 Fahrenheit to 500 Fahrenheit and provides good oxidation and corrosion resistance, low evaporation and oil separation, and has a minimum effect on rubber seals.
The exceptional extreme-pressure performance and the fluidity of the synthetic oil allows increases in bearing life of 200% to 800%.
Red Line CV-2 Grease contains a red moly compound which is a superior lubricant to black moly disulfide lubricants.
Red Line CV-2 Grease may also be used in industrial applications such as high-temperature alternator bearings, high-speed ball bearings, conveyor bearings, worm gear drives, servo mechanisms and applications where vibrations can cause fretting wear and corrosion to take place.
Red Line CV-2 Grease will retain its consistency and extreme-pressure performance under high-temperature and high-shear conditions for extended periods, which extends the performance ranges of the lubricated components.
Red Line CV-2 will slightly darken after high-temperature use; this darkening will not detrimentally effect the performance of the grease.
Although Red Line CV-2 is compatible with small amounts of many petroleum-based greases, it is always good lubrication practice to thoroughly clean out the old grease to eliminate abrasive particles and to minimize the possibility of grease incompatibility.
