Mini Maxx Parts Bundle! (6 Individual Kits Included!)
This Parts Bundle includes everything you need to upgrade your Mini Maxx to the MAX!
Save over 15% on all these kits by buying this bundle!
All of these kits are all made out of a strong and flexible material and will protect the truck from roll overs, bad landings, and cracking. They are designed to improve performance and longevity of the truck.
All required hardware is included
Installation Instructions:
Fender Flares
-The best way I have found to install the Fender Flares is to line one up, then drill out the first hole. Place a bolt with a nut to tighten it down. This helps lining it up along the body for later holes. Next, skip the next one or two and drill out another hole. Bolt that one down and then keep going, skipping a couple just to get the main part lined up and mounted. Then go back and drill out the rest of the mounting holes. If you have any questions, please feel free to message me.
Body Skid Kit
-Hood Skid uses (4) M3x8mm bolts. Just center the skid on the hood as pictured, drill the first hole and bolt it down the keep it lined up. (Remember each skid has a "spacer" part that goes between the nut and inside of the body shell) Next, continue drilling and bolting down the hood skid.
-Roll Bars uses (2) M3x8mm bolts and the preinstalled M3x10mm. One side will be bolted down to the raised part in the bed and the other to the rear window. First, center the "spacer" on the inside of the rear window where you want the bars to bolt up. (Check the height and make sure the bars can sit flush to the raised area in the bed) Then, just drill the two holes in the rear window, using the spacer as a guide. Bolt up the two bars and line them up on that raised area. Drill the hole down into the body once centered. (When bolting these last two up, the heads of the bolts need to be on the inside of the body shell to give the body and shock tower enough clearance)
-Roof Skid uses the (4) M3x10mm bolts and nuts that are pre-installed on the skid. (This is just to separate screw lengths, please remove these and set them aside for now) Line up the skid on the roof, drill the first hole and bolt it down with the spacers. Finish up the rest of those holes and secure the Roof Skid down.
-Rear Skid uses (3) M3x8mm bolts. Just line up the skid and drill the first hole. Bolt it up and finish the rest of the holes.
Mud Guards
-Installation of the Mud Guards requires you to drill a small 7/64” hole in the lower suspension arm. First, mount the Mud Guard in place with the lower shock mounting bolt. Then, line up the part flush with the bottom of the suspension arm. Use the remaining hole to lineup the drill bit and proceed to drill all the way through the suspension arm. Screw in the M3×8mm bolt and your Mud Guard is mounted!
30mm Motor Fan Mount
Simply use the included zip-ties to secure it to the motor can and bolt on your choice of fan.
Hardware included to mount a standard 10mm tall fan.
Body Inserts
Direct Replacements, Easy!
Wheelie Wheels
Direct Replacements, Easy!
Colors Available:
Black, Red, Blue, Green, Orange, White
Compatible With:
Stock Mini Maxx Body
Stock Mini Maxx Suspension Arms
Mini Maxx Wheelie Bar
30-40mm Diameter Motors
Check out the rest of my shop to find more R/C related products! Made with top quality materials that will last through your hardest bash sessions!
Made in the USA!