Aqara Touchscreen Dial V1 EU is a haptic feedback rotary dial wall switch with 2 relay switches and 6 wireless switches, paired with a 1.32-inch round touch screen, which can adjust the compatible Aqara device by sliding, clicking, and rotating. It achieves precise adjustment through ITS vibration and sound feedback. In addition, it has a variety of rich sensors that can monitor indoor temperature and humidity, and set the proximity activation function according to the actual size of the space to reduce light pollution. In addition, the switch seamlessly integrates with third-party ecosystems via Wi-Fi to achieve a more versatile smart home setup.
① This feature might be unavailable in some third-party Matter ecosystems, but is already supported by the device. To guarantee this functionality, we suggest connecting the device to Aqara Home (iOS/Android).
② Available types and model may vary based on current compatibility.
③The dial doesn’t support ‘rotate’ action in Aqara Home automation, it can only rotate to control compatible Aqara devices on-screen. Also, the dial is not exposed to third-party systems.
④Temperature and humidity status can also serve as IF conditions for triggering automations.
⑤Proximity activation distance can be set within five different settings from near to far (0.2-0.6-1-1.5-2 meters).
Morning Wake-Up Routine
IF Someone is approaching (morning period based on preference), THEN Trigger “Morning Scene” <gradually turn on the Bedroom Ceiling Light T1M (brightness increases from 10% to 100% in 10 minutes) & Turn on the Dual Relay Module T2 to activate the coffee maker>
Start your day with a gentle wake-up routine. The light gradually brightens to mimic a natural sunrise, and coffee brews automatically for a refreshing, energizing morning experience
(Touchscreen Dial V1 + Roller Shade Controller T1S + Dual Relay Module T2 + Aqara Hub)
Automatically Turn on the Light When Approaching in Night Mode
IF Someone is approaching, THEN turn on the light
When the switch detects someone at night, it can automatically turn on the light which control by the relay switch of Touchscreen Dial V1 to provide lighting for users who get up late at night.
(Touchscreen Dial V1 + LED Strip T1 + Aqara hub)
Energy-Saving Mode
IF Temperature rises to 28 °C or drops to 18 °C, THEN If above 28 °C: Turn on the AC in cool mode and set it to 26 °C. If Temperature below 18 °C: Turn on the AC in heat mode and set it to 26 °C.
Keep your home comfortable by automatically adjusting the AC’s temperature. This automation ensures a consistent climate while optimising energy use.
(Touchscreen Dial V1 + Hub M3)
A - Use a flat-head screwdriver to pry open the switch panel.
Use a screwdriver to loosen the terminal screws on the back of the switch, connect the live wire to the L hole, connect the neutral wire to the N hole (refer to actual with/no-neutral wiring in your house), connect the load (light) wire to the L1, L2, confirm the wiring is correct, then tighten the terminal screws. Note: The maximum load must not exceed 2200W.
Use the supplied screws to secure the switch to the wall junction box and snap on the switch panel.
Note: Please ensure the main power is turned off before installation!
A - When first-time powered on (not connected to the network), it will enter networking mode by default (screen displaying an adding QR code).
Reset after connection: go to "Settings" - "Rebind" in the device’s drop-down menu.
A - If the wiring is incorrect, the wall switch may fail to operate or even short-circuit, potentially causing damage. Be sure to follow the wiring instructions carefully or consult a professional electrician for installation.
If the neutral and live lines are reversed, the switch may still work, but turning it off leaves the live line active at the fixture, creating a shock hazard.
If the light load (L1) is misconnected to the L or N terminal, there won’t be a short circuit, but the switch won’t respond until correctly connected.
A - No minimum load requirement, but the maximum current under resistive load conditions for the total number of circuits is 8A, Max 8 A (Resistive Load).
A - Supported device: lights, curtain controllers, thermostats, switches, sockets, etc. Meanwhile, associated devices continuously updated and improved. Specific products may vary based on actual usage.
A - The device is a Wi-Fi device and can operate independently without a hub. Note: to configure Aqara Zigbee devices, a compatible hub is required.
A - Maximum number: 18.
A - This product does not have a built-in voice assistant, but you can enable Aqara Copilot for its control.
A - This product supports HomeKit. Once successfully connected to HomeKit, the product will display as 2 electrical switches (wired to load) and 6 wireless switches.
A - 1) In the Aqara Home app device details page, select "Configure".
2) Tap the bottom "Add" button to configure the necessary devices, scenes, etc.
A - The Touchscreen Dial V1 supports 2 loads (L1, L2).