Color: White
Shape: Rectangle
Material: 304 Stainless Steel, 316L Stainless Steel, ABS
Water Inlet Mode: Top Water Inlet
Style: Vertical
Plug: US-Standard
Wire Type: Plug-In
Power Source: Corded Electric
Number of Items: 1
Capacity: 8L/2.1gal
Temperature Regulation Range: 30-65°C/86-149°F
Power Cord Length: 0.9m/2.95ft
Voltage: 110V
Exhaust Pipe Length: 0.6m/1.96ft
Rated Power: 1500W
Rated Pressure: 0.7MPa
Waterproof Level: IPx4
Reserved Installation Height: 100mm/3.94inch
Gross Weight: 4.25kg/9.37lbs
Net Weight: 3.9kg/8.59lbs
Product Size: 27.9*21*28cm/10.98*8.27*11.02in
Package Size: 37*35*34cm/14.56*13.78*13.38in
Package Included
1*Electric Water Heater
1*Safety Valve
1*Exhaust Pipe
1*English Manual
All Accessories for Assembly
Notes
When used for the first time, please fill the water first and then power it later.
For your safety, please properly connect the ground wire and do not use a mobile socket.
Please note it is strictly forbidden to plug the outlet of a one-way relief valve, and the additional pressure is greater when the inner tank is heated by thermal expansion. At 0.75 mpa, the one-way safety valve will automatically drip and release pressure to ensure safety.
The connection pipe of the water supply pipe and water heater must be all metal tubes. not plastic.
When not in use for a long time (over 24 hours), please turn off the water supply and disconnect the power supply.
Please note that the installation of this product requires the following conditions: running water with a water pressure of 0.1MPA, a cold and hot type faucet, and a three-plug power socket (the installation position of the water supply tower should have a drop of more than 5 meters from the water tower).
Please note that this product can only be installed vertically. It is recommended to install it under the water basin. And install the anti-electricity wall at the red hot water outlet and the pressure relief valve at the blue cold water inlet.
Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before you order.
Application
It is very suitable for being installed in areas such as kitchens, bathrooms, RVs, etc. that require hot water but have limited space.
High Efficiency: The 1500W power can heat water in about 8-15 minutes. The L-shaped heating rods have a larger heat exchange area with the water in the tank, which is sufficient to meet your daily hot water needs.
Energy Efficiency: Its energy efficiency level is 2, and it consumes less energy. The combination of the polyurethane foam layer and stainless steel lining can provide an excellent heat insulation effect and better save unnecessary power consumption for you.
Large Capacity: Its size is only 10.98 * 8.27 * 11.02 inches, but its capacity reaches 2.1 gallons, meeting the demand for hot water supply in small and medium-sized kitchens or bathrooms.
Simple Operation: It can automatically keep warm and automatically supplement cold water for heating. You only need to control the temperature through a knob. The LCD screen can clearly display its temperature, and the blue and red interfaces also clearly indicate the hot and cold water, making it easy for even the elderly and children to operate.
Safe to Use: It adopts various protective measures to prevent dry burning, overheating, and high voltage, as well as grounding, isolation, and power outage protection. In addition, its IPX4 waterproof level can protect the safety of you and your family. When the set temperature is reached, the power will automatically turn off.
Small Size: Its size is only 10.98 * 8.27 * 11.02 inches, and it covers an area of only 0.63 square feet. You can easily install it under the sinks and other small spaces.
Temperature Adjustable: The heating temperature can be freely adjusted between 86 to 149 ° F. Low temperature can be used for daily washing, the medium temperature can be used for washing vegetables, and high temperature can be used for washing dishes, which is very convenient.
Good Material: The inner liner is made of 304 stainless steel, which is pressure resistant and explosion-proof, and will not leak; 316L stainless steel heating pipe has good thermal conductivity, which can accelerate the heating process; high strength installation bracket ensures installation safety and prevents plastic aging.
Good Adaptability: It's suitable for different water pressures in different regions, and can also be used in high-rise households. You don't have to worry about the water pressure.
