Bulbs Type: H7 High Beam + H11 Low Beam Replace Halogen Bulb
Warm Tip:
Please wear gloves when installing the halogen bulb and do not touch the glass surface of the halogen lamp directly with your hands! Moisture from your hands that is transferred to the bulbs will reduce the life span and quality of the output of the bulbs.
Please wear gloves when installing the halogen bulb and do not touch the glass surface of the halogen lamp directly with your hands! Moisture from your hands that is transferred to the bulbs will reduce the life span and quality of the output of the bulbs.
Specifications:
• Bulb Socket: H7 + H11
• Color Temperature: 4200K
• Voltage(V): DC 12V
• Working temperature: -40℃~+80℃
• Beam Angle: 360°
• Waterproof Level: IP65
• Material: Aviation Aluminium
• Super Long Service Life: ≥800 Hours
• Warranty: 1 Years
• Canbus Error Free: No. For most vehicles, just directly plug and play. Yet for some vehicles with CAN-BUS system, it may require install decoder or load resistor to avoid hyper flash or fast blinking.
• Please Note: Please check your car manual or original bulb to confirm the bulb size, length is correct or not before purchasing to save your time.
Package Included:
-2Pcs H7 Halogen Headlight Bulbs High Beam
-2Pcs H11 Halogen Headlight Bulbs Low Beam
-2Pcs H11 Halogen Headlight Bulbs Low Beam
(New and old packaging will be shipped randomly)
Install Caution:
1. As a safety precaution, make sure that the car has had time to cool down properly
before starting the installation process.
2. Put the vehicle into park or make sure it is securely in gear.
3. Make sure to have the ignition turned off and the keys removed.
4. Be careful to avoid burns, especially when turning on or off the vehicles lighting.
5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.
6. Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.
7. Make certain that the end of the bulb does not come in contact with the interior.
1. As a safety precaution, make sure that the car has had time to cool down properly
before starting the installation process.
2. Put the vehicle into park or make sure it is securely in gear.
3. Make sure to have the ignition turned off and the keys removed.
4. Be careful to avoid burns, especially when turning on or off the vehicles lighting.
5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.
6. Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.
7. Make certain that the end of the bulb does not come in contact with the interior.