










![]() Warm Reminder: 1. When we describe "wireless", we mean "wireless Wifi". It's not that the camera will work without being plugged into a power source. The camera needs to be plugged in at all times to function properly; 2. This product is only suitable for indoors, but since this is not a waterproof camera, when using it outdoors, you need to pay attention to the location of the camera to protect it from rain, so as not to affect the normal use of the camera, such as at the door, in the garden courtyard, etc.; 3. This camera does not include a TF card. It is recommended to purchase a TF card for viewing and playback. If you pay to use the APP, it is not cost-effective. You need to continue to pay to continue watching replays. Regarding connection issues: 1. Before adding, please make sure the camera is turned on and wait for the network connection status. If not, press and hold the reset button until the factory reset voice prompt comes out, and then try adding it again. 2. If your router is 5G, you may not be able to connect due to network reasons. Please try to turn on the dual-band mode of the router and select the 2.4G signal. 3. If the product cannot be connected, please try to follow the video operation on our link, or follow the product manual. If it still cannot be used normally, please contact us first instead of opening a return or exchange, opening a case, or even giving a negative review. , we believe that communicating with each other to solve problems is the most effective solution, thank you very much for your understanding; 4. If your router is 5G, you may not be able to connect due to network reasons. Please try to turn on the dual-band mode of the router and select the 2.4G signal. 5. If the camera cannot perform tracking function, considering that customers do not like camera movement, our function is turned off by default. It may be that you have not turned on the smart tracking function. When turned on, if someone comes over, the camera will follow that person. How to operate: In the Advanced Setting-intelligent tracking-open it on the APP, you can try to turn on this function and you can track it. 6. If you want the camera to be fixed at a certain position for tracking, you can turn off the tracking function, because there may be bugs on the wall and the camera will follow the position that is always against the wall; . 【Record Your Voice Alarm】Record your own custom voice on the Smart App and set the time range and detection zone.When someone enters the detection zone at the set time, the camera will detect person and play your own pre-recorded voice.Thus, it can be drive away intruders in time at night, even if you are sleeping.it can help you welcome friends and remind you that your friend had arrived, when you have a party. 1.1080P Home Security Camera 2.LED quantity: 4pcs white LED + 4pcs 850nm LED infrared distance up to 7 meters 3.Shell material: ABS 4.Image Sensor: 1/4.5-inch CMOS Sensor 5.Video format: HD 1920*1080 6.Video Coding: H.264 7.Video frame rate: 1-25 frames 8.Recording mode: manual recording, alarm recording 9.Video playback method: mobile client + computer client 10.Audio output: Built-in 8ohm 2W speaker 11.Built-in lens: 3.6MM 12.Infrared light night vision effect: through the photosensitive resistance sensor switch, LED night vision 10 meters, (IR-CUT automatically switch) 13.Minimum illumination: 0.1Lux / F1.2 14.PTZ control: horizontal rotation 360 degree, vertical 90 degree 15.Local storage: Support TF card,Maximum support 128GB TF card(Package Not included), support 24-hour video recording or alarm 16.Wifi: Built in 2.4G WiFi antenna 17.Image Rotation: Mirror / Invert 18.Motion Detection: Support 19.Alarm Action: Ring Alarm / Mobile Client Push 20.Network Interface : Wi-Fi/ IEEE802.11b/g/n 150Mbps(2.4GHZ) 21.Cable length:1M 22.Need to download APP:''AJCloud" APP 23.Voltage:5V/1A 24.Waterproof: No 25.LAN connection:Not support
Usage: Check whether the wireless router is in normal use, and then connect the mobile phone to the WiFi network. If it is a dual-band router, please connect to a 2.4G WiFi network. Download and Install: 2. Open the "AJCloud" APP and register an account using your 3.Wireless access method: If the wireless network connection fails, please follow the APP -Your satisfaction is extremely important to us,if you have any questions, please contact us first.We believe that communication is the best way to solve problems.
|

