eBay

Captive Bucket Hanger 5 Pack | Prevent Thrown Feed and Water Buckets

This 5 pack of captive bucket hangers is perfect for any furballs that like to pull off their feed or water buckets. The design prevents unintentional removal of the bucket handle by redirecting the handle back into itself and minimizing any surfaces that cause harm, but does not add any difficulty in taking the bucket off when lifting straight out. If they like to stand in the bucket, this may not be the best fit though.

The slot has a width of ~0.25in/7mm allowing most of the feed store buckets to work without issue. The larger 5gal/20L buckets will have a slight amount of resistance through the slot, but the flex in the hook will still allow it to work, rotating the bucket to a straighter section of handle and wiggling does help. Other items such as hay nets, can also be hung or tied to the hook! Is rated to 50lb of continuous hanging force, but can take more!

The hook is 3.85"/98mm tall, 0.78"/20mm wide and 1.57"/40mm thick with a near solid plastic 3D printed construction. No strength is lost while reducing material usage and weight. Two included screws are uséd and the hooks must be securely mounted to a suitable surface to prevent damage.

3D Printed to order with PETG filament that is strong and safe for indoor and outdoor use utilizing the fuséd deposition modeling (FDM) printing that is safe to above 150 Fahrenheit. This does result in the surface not having a perfectly smooth finish and other minor imperfections may be present. If you have any questions about the product, finish, or process, don't hesitate to reach out for more information.