Features:

            • Condition:100% Brand New
            • Color:Black
            • Light Color: Red/Blue/Green
            • 1-6 Gear display

            Instructions Guide:

              • Disclaimer: Do not attempt to install the product if you don’t have basic mechanical skills. If in doubt, please consult with your dealer.
                • 1. Locate the Speed Sensor coupler. The Speed Sensor (Wheel Sensor) is either on the top of the gearbox or at the front wheel. The 3-pole black speed sensor coupler is usually accessible by raising the fuel tank
                Confirmation:
                Separate the Speed Sensor coupler (you might need to use a small flathead screwdriver to get the coupler apart). Rotate the front wheel while the ignition is on. Does the speedometer show 0, turn the ignition off and proceed to the next step. Otherwise, try again since you have disconnected something else.
                 
                • 3. Locate the ECM (also called ECU) box. It is a flat box with one or more multi-pin connectors under the seat.
                • 4. Find the RPM signal wire in the ECM connector:
                • Sprint RS/ST                      Blue/Black (Solid Blue wire with thin Black stripe)
                •                                             This is the Crankshaft sensor wire. You can tap
                •                                             either at the 2-pole sensor plug or at the ECM.
                • ALL other models             Red (Solid color with no stripe)
                •                                             This is the tacho signal wire.
                •                                             Alternatively, tap the wire from the Crankshaft Sensor
                •                                             (Blue/Purple), either at the 2-pole sensor plug or at the ECM.
                • 5. Peel off the black sleeve (tape), leaving about 3 cm (1.2”) of this wire exposed.
                • 6. Connect the GFYSHIP Black/Green wire to this wire, using the Red wire tap
                  • connector supplied.

                • Setup:

                  You need to setup the module after installation. When ignition is turned on, the
                  display counts backwards (6 to 1) indicating that the memory is clear.
                  - Raise the rear wheel off the ground by using a stand, and start the
                  engine in Neutral. (If you do not have a stand, you may setup the unit while
                  riding. Find a long, straight road with light traffic.)
                  - The display will blink “1”. Select first gear, release the clutch, and keep the RPM above idle speed.
                  The display is blinking faster while the unit is learning the gear.
                  - When the display shows “2”, select second gear. Repeat this process until all gears are thought (5 or 6). The unit is programmed and should indicate the gears correctly.
                  Now, when ignition is turned on, the display counts forward (1 to 6) indicating
                  that it is fully functional.

            Package Include:

            • 1 x Gear Indicator (Contains installation instructions)

            Fitment:

            For Triumph Daytona 600      2003-2004
            For Triumph Daytona 955i      2002-2006
            For Triumph Scrambler With LCD ODO      ALL YEARS
            For Triumph Speed Triple NON ABS      2002-2004
            For Triumph Speed Four      2002-2006
            For Triumph Sprint RS      1999-2004
            For Triumph Sprint ST      1998-2004
            For Triumph Street Scrambler      ALL YEARS
            For Triumph Thruxton 865      2004-2013
            For Triumph Tiger 900      1999-2000
            For Triumph Tiger 955i      2001-2006
            For Triumph TT600     2000-2003
            For Kawasaki D-Tracker 125   2010-2015
            For Kawasaki D-Tracker 250 NON-FI Model   ALL YEARS
            For Kawasaki D-Tracker 250 FI Model   ALL YEARS
            For Kawasaki KL250 Super Sherpa   1997-2010
            For Kawasaki KLX125   2010-2015
            For Kawasaki KLX250 NON-FI Model   ALL YEARS
            For Kawasaki KLX250 FI Model   ALL YEARS
            For Kawasaki Ninja 250SL   2014-2016
            For Kawasaki Ninja 250RR   2014-2016
            For Kawasaki VN1500   2001-2008
            For Kawasaki VN1600   2003-2009
            For Kawasaki Vulcan 1500   2001-2008
            For Kawasaki Vulcan 1600   2003-2009
            For Kawasaki Z250SL   2014-2016
            For Kawasaki Ninja ZX12R   2000-2003

          •