Recommended Fabrics: 
100% Polyester, 100% Cotton, and Cotton/Polyester blends. Always test print fabric before beginning a production run.

Ink Application:

Additives:  

Curable reducer: 5-30% use to thin or soften ink, use sparingly. 

Puff Additive: 3-7% 

Stretch Additive: 5-10%

Sport Series should be used right from the container without any modifications. If thinning is required, use 1% to 10% by weight of a Curable Low Bleed Reducer. Adding any reducers or additives can lower the bleed resistance, opacity, or increase cure times of ink. STIR the ink prior to printing on press and after addition of reducers or additives.

Mesh and Emulsion:
85-230 t/in monofilament.
Any direct or indirect emulsion or capillary film in the 35 to 70 micron range, for best results.

Squeegee:
65-70 Durometer, Sharp Edge

Cure Temperatures:
325F entire ink film for multiple color prints. Test dryer temperatures and wash test printed product before and during a production run.

Clean-Up:
Any environmentally friendly plastisol screen wash

Storage:
Recommend storage at 65°F to 90°F (18°C to 32°C). Avoid storage in direct sunlight. Keep containers well sealed