Vibration Sensor Switch Angle Tilt Shaking Sensitivity
Product Information:
The vibration switch, the correct name should be called the vibration sensor, is an electronic switch that transmits the induction result to the circuit device when the vibration force is sensed, and makes the circuit start to work. Others call it a vibrating switch, others call it a slide switch or a shake switch, and so on, but these names are not entirely correct. The names in the industry are generally divided into two categories, spring switches and ball switches. In fact, strictly speaking, the vibration switch should simply refer to the spring switch, not including the ball switch. The name of the vibration switch seems to be just a typo caused by the homophony of "vibration" and "quake". Due to a long time, it is also recognized by people as a misunderstanding. Strictly speaking, the term vibration switch is wrong. Other names such as slide switches, shake switches, etc., should refer to ball switches. For convenience, the industry generally refers to the two categories of spring switches and ball switches collectively as vibration switches. Vibration switches are mainly used in electronic toys, small household appliances, sports equipment and various anti-theft devices and other products. The vibration switch has become an indispensable electronic component in many electronic products because of its flexible and sensitive triggering.
Technical Specifications
Scope of application: Small current vibration switch. Vibration sensor for low current loop (secondary loop) that produces electrical changes when the product shakes horizontally from side to side.
Operating temperature range: 5~70℃ and humidity below 85%.
Storage temperature range: 15~45℃ and humidity below 80% for 90 days.
Test status: Unless otherwise specified, the tests and tests are carried out under the following standard conditions. Temperature: 5~35 ℃ Relative humidity: 45%~85%.
The inclination of the test installation surface is 15°, and it is not affected by other vibration forces, but if there is any objection to the judgment, the test shall be carried out according to the following basic conditions. Temperature: 20±2℃ Relative humidity: 70~80%.
Precautions
1.Scope of application: Small current vibration switch. Vibration sensor for low current loop (secondary loop) that produces electrical changes when the product shakes horizontally.
2. Operating temperature range: 5~70℃ humidity below 85[%].
3. Storage temperature range: 15~45℃ Humidity below 80[%] Store for 90 days.
4. Test state: Unless otherwise specified, the test and test shall be carried out under the following standard state. Temperature: 5~35℃ Relative humidity: 45%~85%.
The inclination of the test installation surface is 15° and it is not affected by other vibration forces, but if there is any objection to the judgment, the test shall be carried out according to the following basic conditions. Temperature: 20±2℃ Relative humidity: 70~80[%].
Structure appearance
1. Appearance: All parts are processed well, and there should be no defects such as rust, cracks, electroplating peeling that affect the function.
2. Structure and size: according to the specific drawings.
3. Rated, max VA 12V-DC 2mA (resistive load).
1.Scope of application: Small current vibration switch. Vibration sensor for low current loop (secondary loop) that produces electrical changes when the product shakes horizontally.
2. Operating temperature range: 5~70℃ humidity below 85[%].
3. Storage temperature range: 15~45℃ Humidity below 80[%] Store for 90 days.
4. Test state: Unless otherwise specified, the test and test shall be carried out under the following standard state. Temperature: 5~35℃ Relative humidity: 45%~85%.
The inclination of the test installation surface is 15° and it is not affected by other vibration forces, but if there is any objection to the judgment, the test shall be carried out according to the following basic conditions. Temperature: 20±2℃ Relative humidity: 70~80[%].
Structure appearance
1. Appearance: All parts are processed well, and there should be no defects such as rust, cracks, electroplating peeling that affect the function.
2. Structure and size: according to the specific drawings.
3. Rated, max VA 12V-DC 2mA (resistive load).
Product name: SW420
Voltage: <24
Current: <1MA
Temperature: <80°C
①SW-420 single-roller type induction trigger switch, this product can sense the vibration and tilt of different sides.
②When there is no vibration or tilt, the product is in a closed-circuit ON/OFF state and is in a stable state. When there is vibration or tilt, the conductive resistance increases or decreases, generating a current pulse signal, thereby triggering the circuit.
③This product is waterproof and dustproof.
④ This product is suitable for tilting and vibration induction triggering of small current circuits.
Voltage: <24
Current: <1MA
Temperature: <80°C
①SW-420 single-roller type induction trigger switch, this product can sense the vibration and tilt of different sides.
②When there is no vibration or tilt, the product is in a closed-circuit ON/OFF state and is in a stable state. When there is vibration or tilt, the conductive resistance increases or decreases, generating a current pulse signal, thereby triggering the circuit.
③This product is waterproof and dustproof.
④ This product is suitable for tilting and vibration induction triggering of small current circuits.
Product Name:SW-520D
Voltage: 12V
Current: 20MA
Temperature: 100°C
①SW-520D is a ball-type tilt vibration sensor unidirectional trigger switch.
②When the product is inclined to the cap end and the inclination angle is greater than 10°, it is in the open-circuit OFF state. When the horizontal state of the product changes inclination (and the leads are parallel to the plane direction, the lower and upper heights are the same), the trigger end (gold-plated pin end A When the angle with B) is lower than the horizontal inclination angle greater than 10°, it is a closed circuit ON state.
③ When the product is inclined to the cap end, and the inclination angle is greater than 10°, it is in the open-circuit OFF state. When the horizontal state of the product changes inclination (and the lead is parallel to the plane direction, the lead is one up and down), the trigger end (gold-plated pin end) When A and B) are lower than the horizontal inclination angle greater than 45 degrees, the closed circuit is in the ON state.
Voltage: 12V
Current: 20MA
Temperature: 100°C
①SW-520D is a ball-type tilt vibration sensor unidirectional trigger switch.
②When the product is inclined to the cap end and the inclination angle is greater than 10°, it is in the open-circuit OFF state. When the horizontal state of the product changes inclination (and the leads are parallel to the plane direction, the lower and upper heights are the same), the trigger end (gold-plated pin end A When the angle with B) is lower than the horizontal inclination angle greater than 10°, it is a closed circuit ON state.
③ When the product is inclined to the cap end, and the inclination angle is greater than 10°, it is in the open-circuit OFF state. When the horizontal state of the product changes inclination (and the lead is parallel to the plane direction, the lead is one up and down), the trigger end (gold-plated pin end) When A and B) are lower than the horizontal inclination angle greater than 45 degrees, the closed circuit is in the ON state.
Product name:SW-200D
Voltage: 12V
Current: 2MA
Temperature: <100°C
①This switch is made of metal material, and its electrical characteristics are similar to those of mercury switches, but it does not have the dangers and environmental protection problems of mercury switches.
②Working characteristics The golden end is the (ON) conduction trigger section, and the silver end (OFF) is the open end. When it is shaken by external force to achieve proper shaking, or the golden end is set at an angle lower than the horizontal proper angle, the electrical characteristics of the contact pin of the lead point will produce Short-term conduction or continuous conduction (ON) state, the setting environment of the switch must be static, and the setting angle of the silver end must be 10° lower than the horizontal.
③ When the switch is set below the level, the shaking time can be triggered lightly, but when the silver end is set downward, the shaking is not easy to trigger.
Voltage: 12V
Current: 2MA
Temperature: <100°C
①This switch is made of metal material, and its electrical characteristics are similar to those of mercury switches, but it does not have the dangers and environmental protection problems of mercury switches.
②Working characteristics The golden end is the (ON) conduction trigger section, and the silver end (OFF) is the open end. When it is shaken by external force to achieve proper shaking, or the golden end is set at an angle lower than the horizontal proper angle, the electrical characteristics of the contact pin of the lead point will produce Short-term conduction or continuous conduction (ON) state, the setting environment of the switch must be static, and the setting angle of the silver end must be 10° lower than the horizontal.
③ When the switch is set below the level, the shaking time can be triggered lightly, but when the silver end is set downward, the shaking is not easy to trigger.
※ Please note: We specialise in the production of various hardware accessories, hardware tools and mechanical transmission system components. If you have any other needs, please contact me and we will solve your problem promptly!
▲ Tips:
◆ All pictures are professionally colour-coded, but due to the different ambient light and display device settings, there may be some discrepancies between the displayed pictures and the items themselves. Please understand this.
◆ The data is measured manually. There may be deviations, but this has no effect on use.
