HS-100 Small It can be classified into: HS Series, Suction Cup Wire Tie Positioning Piece. Material: UL qualified NYLON 66, fire rating 94V-2. Usage: 1. Adhesive products are basically imported from the United States. 2. The surface must be clean, even and dry. Do not use in the soil, rough, loose surface. 3. Use the surface is not clean then you need to use detergent to wipe the installation surface clean. 4. Carefully remove the backing paper and quickly place the product in the proper position. Press firmly to maintain full contact. 5. Adhesion of the product is affected by the size of the bottom area, temperature and holding time. 6. The optimum temperature for adhesive application is (6°C-35°C). Try to avoid the use of lower temperatures than this, resulting in the paste is too hard to effectively become wet. Features: adhesive-backed assembly is simple, fast, firm, easy to open, can be reused many times, does not occupy space. Application: chassis internal cable management, engineering wiring harness. One type of holder can be used for various sizes of wires. STM-0 Small The alias of cable tie holder STM can be further divided into: cable tie holder, harness holder. Colour: white Wire Tie Mount STM belongs to the series of mounts, which are mainly used for fixing wires and cables on the substrate. Material: UL-qualified NYLON66 (natural colour), fire rating 94V-2; Usage: Fix the holder with screws first, then use cable ties to bind the cables, the saddle shape design makes the cables easy to fix. Other points: ROHS compliant STM-1 Medium The STM is also known as cable tie holder, cable tie holder and cable tie holder. Colour: White Wire Tie Mount STM belongs to the series of mounts, which are mainly used for fixing wires and cables to the substrate. Material: UL-qualified NYLON66 (natural colour), fire rating 94V-2; Usage: Fix the holder with screws first, then use cable ties to bind the cables, the saddle shape design makes the cables easy to fix. Other points: ROHS compliant FC-1 Small It can be classified into the following: Sticky Fixing Holder FC Series, Sticky Wire Clamp. Material: UL-qualified NYLON 66, fire rating 94V-2. Usage: 1. Adhesive products are basically made of 3M adhesive imported from the USA. 2. The surface must be clean, even and dry. Do not use in the soil, rough, loose surface. 3. Use the surface is not clean then you need to use detergent to wipe the installation surface clean. 4. Carefully remove the backing paper and quickly place the product in the proper position. Press firmly to maintain full contact. 5. Adhesion of the product is affected by the size of the bottom area, temperature and holding time. 6. The optimum temperature for adhesive application is (6°C-35°C). Try to avoid the use of lower temperatures than this, resulting in the paste is too hard to effectively become wet. Features: adhesive-backed assembly is simple, fast, firm, easy to open, can be reused many times, does not occupy space. Application: chassis internal cable management, engineering wiring harness. A kind of fixed seat, can be suitable for a variety of specifications of wire use. HS-101 Medium It can be divided into: HS series, suction cup cable tie positioning piece. Material: UL-qualified NYLON 66, fire rating 94V-2. Usage: 1. Adhesive products are basically imported from the United States. 2. The surface must be clean, even and dry. Do not use in the soil, rough, loose surface. 3. Use the surface is not clean then you need to use detergent to wipe the installation surface clean. 4. Carefully remove the backing paper and quickly place the product in the proper position. Press firmly to maintain full contact. 5. Adhesion of the product is affected by the size of the bottom area, temperature and holding time. 6. The optimum temperature for adhesive application is (6°C-35°C). Try to avoid the use of lower temperatures than this, resulting in the paste is too hard to effectively become wet. Features: adhesive-backed assembly is simple, fast, firm, easy to open, can be reused many times, does not occupy space. Application: chassis internal cable management, engineering wiring harness. One kind of holder can be suitable for many kinds of wires. CL-2 Material: UL-qualified NYLON 66 (natural colour), fire rating 94V-2. Usage: Tear off the adhesive backing of the holder first, then stick the holder on top of the fixed item and fix it. 1. 3M adhesive is imported from USA. 2. The surface must be clean, even and dry. Do not use on the soil, rough, loose surface. 3. If the surface is not clean, you need to use detergent to wipe the installation surface clean. 4. Carefully remove the backing paper and quickly place the product in the proper position. Press firmly to maintain full contact. 5. Adhesion of the product is affected by the size of the bottom area, temperature and holding time. 6. The optimum temperature for adhesive application is (6°C-35°C). Try to avoid the use of lower temperatures than this, resulting in the paste is too hard to effectively become wet. Features: adhesive-backed assembly is simple, fast, firm, easy to open, can be reused many times, does not occupy space. Application: chassis internal cable management, engineering wiring harness. A kind of fixed seat, can be suitable for a variety of specifications of the wire use. STM-2 Large The STM cable tie holder can be divided into: cable tie holder, cable tie holder. Colour: White Wire Tie Mount STM belongs to the series of mounts, which are mainly used for fixing wires and cables on the substrate. Material: UL-qualified NYLON66 (natural colour), fire rating 94V-2; Usage: Fix the holder with screws first, then use cable ties to bind the cables, the saddle shape design makes the cables easy to fix. Other points: ROHS compliant HS-102 Large It can be classified into: HS series, Suction Cup Cable Tie Positioning Piece. Material: UL-qualified NYLON 66, fire rating 94V-2. Usage: 1. Imported glue is basically used for the adhesive product series. 2. Paste the surface must be clean, even, dry. Do not use on soil, rough, loose surface. 3. If the surface is not clean, you need to use detergent to wipe the installation surface clean. 4. Carefully remove the backing paper and quickly place the product in the proper position. Press firmly to maintain full contact. 5. Adhesion of the product is affected by the size of the bottom area, temperature and holding time. 6. The application temperature of the adhesive is (6°C-35°C). Try to avoid the use of lower temperatures than this, resulting in the paste is too hard to effectively become wet. Features: adhesive-backed assembly is simple, fast, firm, easy to open, can be reused many times, does not occupy space. Application: chassis internal cable management, engineering wiring harness. A kind of fixed seat, can be suitable for a variety of specifications of wire use. FC-2 Large Its alias can be divided into: sticky fixing seat FC series, sticky wire clip. Material: UL qualified NYLON 66, fire rating 94V-2. Usage: 1. Adhesive products are basically made of 3M adhesive imported from USA. 2. The surface must be clean, even and dry. Do not use in the soil, rough, loose surface. 3. Use the surface is not clean then you need to use detergent to wipe the installation surface clean. 4. Carefully remove the backing paper and quickly place the product in the proper position. Press firmly to maintain full contact. 5. Adhesion of the product is affected by the size of the bottom area, temperature and holding time. 6. The application temperature of the adhesive is (6°C-35°C). Try to avoid the use of lower temperatures than this, resulting in the paste is too hard to effectively become wet. Features: adhesive-backed assembly is simple, fast, firm, easy to open, can be reused many times, does not occupy space. Application: chassis internal cable management, engineering wiring harness. A kind of fixed seat, can be suitable for a variety of specifications of wire use.