How to Reset

1. Switch on the controller and wait for the voice prompts

2. Press the SET button for 3 seconds and it will be in configuration mode

3. Set the password and wait for thevoice prompts

4. Press the SET button again to save the password

How to Modify the Trigger Sequence

1. Switch off and switch on the controller (reset the controller)

2. Hold the set button for three seconds, and release the button until you hear the voice prompts

3. Design the sensor sequence that you want and press the set button again to save the sequence  

4. When the voice prompt ends, re-power the prop and test it

How to Modify the Audio File

1. Insert the TF card into the card reader and connect them to the computer

2. Open the removable disk shown in the computer, and back up all the original files in the controller

3. Replace the original file with your favorite audio file (the original audio file should be deleted). There’s no need to change  the path and the file name. Note that the audio file format must be MP3

4. If you want to format a removable disk, please format it only in FAT format