Item specifics
Engineering Name:Fuel Pump
Item Condition: New
Quantity Needed: 1
OE Spec or Performance/Custom:OE Spec
Fits the following vehicles
Nissan Frontier
2005 LE 4.0L
2005 Nismo Off-Road 4.0L
2005 SE 4.0L
2005 XE 2.5L
2006 LE 4.0L
2006 Nismo Off-Road 4.0L
2006 SE 4.0L
2006 XE 2.5L
2007 LE 4.0L
2007 Nismo Off-Road 4.0L
2007 SE 4.0L
2007 XE 2.5L
2008 LE 4.0L
2008 Nismo Off-Road 4.0L
2008 SE 4.0L
2008 SE 2.5L
2008 XE 2.5L
2009 LE 4.0L
2009 PRO-4X 4.0L
2009 SE 4.0L
2009 SE 2.5L
2009 XE 2.5L
2010 LE 4.0L
2010 PRO-4X 4.0L
2010 SE 4.0L
2010 SE 2.5L
2010 XE 2.5L
2011 PRO-4X 4.0L
2011 S 4.0L
2011 S 2.5L
2011 SL 4.0L
2011 SV 4.0L
2011 SV 2.5L
2012 PRO-4X 4.0L
2012 S 4.0L
2012 S 2.5L
2012 SL 4.0L
2012 SV 4.0L
2012 SV 2.5L
2013 Desert Runner 4.0L
2013 PRO-4X 4.0L
2013 S 4.0L
2013 S 2.5L
2013 SL 4.0L
2013 SV 4.0L
2013 SV 2.5L
2014 Desert Runner 4.0L
2014 PRO-4X 4.0L
2014 S 4.0L
2014 S 2.5L
2014 SL 4.0L
2014 SV 4.0L
2014 SV 2.5L
2015 (submodel: S, SV) 2.5L
2016 Desert Runner 4.0L GAS
2016 PRO-4X 4.0L GAS
2016 S 2.5L GAS
2016 S 4.0L GAS
2016 SL 4.0L GAS
2016 SV 4.0L GAS
2016 SV 2.5L GAS
2017 Desert Runner 4.0L GAS
2017 PRO-4X 4.0L GAS
2017 S 2.5L GAS
2017 S 4.0L GAS
2017 SL 4.0L GAS
2017 SV 4.0L GAS
2017 SV 2.5L GAS
2018 (submodel: S, SV) 2.5L GAS
Nissan Pathfinder
2005 (submodel: LE, SE, SE Off-Road, XE) 4.0L
2006 (submodel: LE, S, SE, SE Off-Road) 4.0L
2007 (submodel: LE, S, SE, SE Off-Road) 4.0L
2008 (submodel: LE, S, SE, SE Off-Road) 4.0L
2009 (submodel: LE, S, SE, SE Off-Road) 4.0L
2010 (submodel: LE, S, SE) 4.0L
2011 (submodel: LE, S, Silver Edition, SV) 4.0L
2012 (submodel: LE, S, SV) 4.0L
Nissan Xterra
2005 (submodel: Off-Road, S, SE) 4.0L
2006 (submodel: Off-Road, S, SE, X) 4.0L
2007 (submodel: Off-Road, S, SE, X) 4.0L
2008 (submodel: Off-Road, S, SE, X) 4.0L
2009 (submodel: Off-Road, S, SE, X) 4.0L
2010 (submodel: Off-Road, S, SE, X) 4.0L
2011 (submodel: PRO-4X, S, SV, X) 4.0L
2012 (submodel: PRO-4X, S, SV, X) 4.0L
2013 (submodel: PRO-4X, S, X) 4.0L
2014 (submodel: PRO-4X, S, X) 4.0L
2015 (submodel: PRO-4X, S, X) 4.0L
Suzuki Equator
2009 Base 2.5L
2009 Base 4.0L
2009 JX 4.0L
2009 Premium 2.5L
2009 RMZ-4 4.0L
2009 Sport 4.0L
2010 Base 2.5L
2010 Premium 2.5L
2010 RMZ-4 4.0L
2010 Sport 4.0L
2011 Base 2.5L
2011 Premium 2.5L
2011 RMZ-4 4.0L
2011 Sport 4.0L
2012 Base 2.5L
2012 Premium 2.5L
2012 RMZ-4 4.0L
2012 Sport 4.0L
What is a Fuel Pump?
The fuel pump is one of the basic components of the fuel injection system of an EFI vehicle. It is located inside the fuel tank of the vehicle. The fuel pump works when the engine is started and the engine is running. If the engine stops and the ignition switch is still ON, the HFM-SFI control module turns off the fuel pump. power supply to avoid accidental ignition.
What is the function of the fuel pump?
The function of the fuel pump is to suck the fuel out of the fuel tank, pressurize it and deliver it to the fuel supply pipe, and cooperate with the fuel pressure regulator to establish a certain fuel pressure.
Safety Precautions for Fuel Pump Fault Detection
1. Old fuel pump
When troubleshooting a vehicle fuel pump that has been used for a long period of time, such fuel pumps should not be dry tested. Because when the fuel pump is disassembled, due to the remaining fuel in the pump casing, during the power-on test, once the contact between the brush and the commutator is poor, sparks will be generated to ignite the fuel in the pump casing and cause an explosion. Very serious.
2. New fuel pump
A dry test shall not be carried out on the newly replaced fuel pump. Because the oil pump motor is sealed in the pump casing, the heat generated by power-on during the dry test cannot be dissipated. Once the armature is overheated, the motor will be burned, so the fuel pump must be immersed in fuel for the test.
3. Other aspects
After the fuel pump leaves the fuel tank, the fuel pump should be wiped clean in time, and sparks should be avoided near it, and the safety principle of "wiring first, then power on" should be followed.
Instructions
1.Because of the complexity of installing and diagnosing fuel pump assembly, it is recommended to be operated by a registered technician.Please
check the equipment and ampere.First of all.Please feel free to contact us for warranty terms and safety.Return policy to avoid any trouble.
2.The newly replaced fuel pump shall not be subjected to dry test.As the oil pump motor is sealed in the pump housing, the heat generated by
electrical energy cannot be distributed.Once the armature overheats, the motor burns out, so the fuel pump must be immersed in the fuel.