• 100% quality assurance tested, more responsive, less expensive, easier to install.
• Directly replace your broken shift cable clip, high-quality at an affordable price.
• Connect and fix the shift cable, and restore your vehicle transmission.
• Made of quality steel, protect from corrosion, ensuring long-lasting performance.

10x Shift Cable Clip.

Replacement/Installation:

1. Ensure that the steering column shift lever and the transmission manual shaft lever are in the park position
2. Raise the vehicle. Refer to Vehicle Lifting.
3. Pull back the white plastic cover on the center connector.
4. Pull up the center tabs of the lock button.
NOTE: This step must be performed correctly to avoid a misadjusted cable. Do not grasp the shift cable end  during this procedure
5. Release the shift cable end and allow the blue spring to tension/adjust the shift cable system.
6. Pull the white cover on the shift cable end back.
7. Push the natural colored lock button down to engage the locking teeth on the shift cable end.
8. Release the white cover.
9. Verify the white cover conceals the natural colored lock.
10. If the white cover does not conceal the natural colored lock, the shift cable must be readjusted.
11. Test the transmission for proper shift operation.
NOTE: Do not reuse the existing removed E-clip. Discard the removed E-clip.
10. Remove the E-clip by pulling radially on the center section of the E-clip.
11. Pull the shift cable center connector ends apart.
12. Remove the cable half from the vehicle.
13. Install a NEW E-clip to the shift cable end by pushing the E-clip straight down (radially) onto the cable end.

For Chevy Silverado / GMC Sierra with the 4l80e Allison 4l60e Transmission.
Vehicle compatibility charts are for REFERENCE ONLY. Check your vehicle with OEM below to match your needs.