Supermicro PDSMU Rev 1.1 LGA775 Xeon 3000/3200 4x DIMM Slots Server Motherboard
In Good Condition
In Full Working Order
Tested
2 Years Warranty Included
Included:
  • 1 x Supermicro PDSMU Rev 1.1 LGA775 Xeon 3000/3200 4x DIMM Slots Server Motherboard
Specification:


Physical Stats
Form Factor
  • Proprietary
    • Dimensions
    • 8" x 13 ", (33.02cm x 20.32 cm)
     
    Processor/Cache
    CPU
    • Single LGA775 ZIF Socket
    • Supports a Quad-Core Intel® Xeon® 3200 series processor
    • Supports a Dual-Core Intel® Xeon® 3000 series processor
    • Supports a Quad-Core Intel® Core™2 Extreme series processor
    • Supports an Intel® Core™2 Quad series processor
    • Supports an Intel® Core™2 Duo series processor
    • Supports an Intel® Pentium® processor E2000 series
    • Supports a Dual-Core Intel® Pentium® D processor
    • Supports an Intel® Pentium® Extreme Edition processor
    • Supports an Intel® Pentium® 4 processor
    • Supports an Intel® Celeron® processor E1000 series
    • Supports an Intel® Celeron® processor 400 series
    • NOTE: This board DOES NOT support Q9000, E8000, E7000, E5000 series or 45nm processor
    System Bus
    • 1066 / 800 / 533 MHz system bus
     
    System Memory
    Memory Capacity
    • Four 240-pin DIMM sockets
    • Supports up to 8 GB of memory (Single / Dual Channel)
    Memory Type
    • DDR2 667/533MHz unbuffered, ECC / non-ECC SDRAM, 240-pin gold-plated DIMMs
    DIMM Sizes
    • 256 MB, 512 MB, 1 GB, 2GB
    Memory Voltage
    • 1.8V only
     
    On-Board Devices
    Chipset
    • Intel 3010 (Mukilteo-2P) chipset
    • ICH7R + PXH + Intel® 82573V + Intel® 82573L
    Serial ATA
    • Intel® ICH7R SATA2 (3 Gbps) controller built-in
    • Intel:
      RAID 0, 1, 5, 10 support (Windows Only)
    • Adaptec:
      RAID 0 (Two, three, four drives only)
      RAID 1 (Two hard drives only)
    IPMI
    • Support for Intelligent Platform Management Interface v.2.0
    • IPMI 2.0 with virtual media over LAN & optional KVM-over-LAN support
    • SIMSO Slot - Supermicro Intelligement Management
    • (Optional: AOC-SIMSO+)
    • NOTE: Must use dedicated LAN for IPMI function
    Network Controllers
    • 2x Single-port Gigabit PCI-Express Ethernet Controllers
    • Intel® 82573V + Intel® 82573L
    • Supports 10BASE-T, 100BASE-T, 1000BASE-T, RJ45 output
    VGA
    • On-board ATI ES1000 (16MB) graphics
    Super I/O
    • Winbond 83627HG chip
    Clock Generator
    • CK410
     
    Input / Output
    Serial ATA
    • Four Serial ATA ports (3 Gbps performance)
    • Four SATA hard drives supported
    IDE
    • One EIDE channel supports up to two UDMA IDE devices
    • Supports UDMA Mode 5, PIO Mode 4, and ATA/100
    Floppy
    • 1 Floppy controller; 1.44 MB
    LAN
    • 2x RJ45 LAN ports
    USB
    • Up to 6x USB 2.0 / 1.1 compliant ports
    • 2 rear ports
    • 2 internal header for 4 USB 2.0/1.1 ports
    VGA
    • 1x VGA port
    Keyboard / Mouse
    • PS/2 keyboard and mouse ports
    Serial Ports
    • 1x Fast UART 16550 serial port
    • 1x internal header
    Chassis ( Optimized for PDSMU )
    1U
    2U
    Important Note
    • For a general system, a 420W (minimum) ATX12V power supply [8-pin +12V AND 24-pin is recommended to assure system stability].
     
    Expansion Slots
    Universal I/O
    • 1 Universal (UIO) slot
    • Used in conjunction with Supermicro UIO Controller Card
    PCI-Express
    • 2 (x8) PCI-e slot
    • 1 (x4) PCI-e slot
     
    System BIOS
    BIOS Type
    • 8Mb Flash EEPROM with Phoenix BIOS®
    BIOS Features
    • Plug and Play (PnP)
    • DMI 2.3 support
    • PCI 2.2
    • ACPI 1.0
    • SMBIOS 2.3
    • USB Keyboard support
     
    Management
    Software
    Power Configurations
    • ACPI Power Management
    • Main Switch Override Mechanism
    • Wake-On-Ring (WOR) header
    • Wake-On-LAN (WOL) header
    • Power-on mode control for AC power loss recovery
    • Internal/External modem remote ring-on
     
    PC Health Monitoring
    Voltage
    • Monitors for CPU Cores (+1.5V, +1.8V, +3.3V, +5, ±12V, +5V Standby, VBAT)
    • CPU Core 4-Phase-switching voltage regulator with auto-sense from 0.3750V-1.6000V
    FAN
    • Total of six 4-pin fan headers
    • 6x fans with tachometer monitoring
    • Status monitor with firmware / software speed control
    • Status monitor for on/off control
    • Support 3-pin fans (with speed control)
    • Low noise fan speed control
    • Pulse Width Modulated (PWM) fan connector
    Temperature
    • Monitoring for CPU and chassis environment
    • CPU Thermal Trip support
    • Thermal Monitor (TM2) Support
    • PECI
    LED
    • CPU / System Overheat LED
    • Standby alert LED
    Other Features
    • Chassis intrusion detection
    • Chassis intrusion header
     
    Operating Environment
    Environmental Spec.
    • Operating Temperature: 10°to 35°C (50°to 95°F)
    • Non-operating Temperature: -40°to 70°C (-40°to 158°F)
    • Operating Relative Humidity: 8% to 90% (non-condensing)
    • Non-operating Relative Humidity: 5 to 95% (non-condensing)
     









    VAT @  20% INCLUDED IN PRICE - VAT INVOICE PROVIDED 
    £60 ex VAT
     
    VAT IS NOT PAYABLE BY PURCHASERS OUTSIDE THE UK

    LJM 307329 -3