| Industrial Water Chiller For CNC/Laser Engraver | |||||||||||||||||||||||||||||||
| The main function of is water cycle,if you want refrigeration and cooling,we recommend #130058 | |||||||||||||||||||||||||||||||
 |
|||||||||||||||||||||||||||||||
 |
|||||||||||||||||||||||||||||||
| CW-3000 Series is professional cooling machine
referring to international,advanced thermolysis cooling system design, suitable
for small water-cooled cooling devices requested machinery. 1. Specific disconnection alarm security protection. 2. Hermetic type water tank, water is available for a long time used. 3. Real-time temperature monitoring, accurate knowledge of heating devices working condition. 4. Professional air-cooled forced radiator with strong heat dissipating capacity and difficult to be blocked up. 5. Equipped with alarm output port to protect sensitive components quickly. 6. High cost performance, low failure rate. |
|||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||
| CAUTION
1. It is strictly forbidden to plug and run the cooler without feeding water. 2. Cooler should be placed in a well-ventilated, dry environment place and away from heat sources. Please keep at least 30cm from obstructions to the air outlet which is in the back of the cooler, and should leave at least 10cm between obstructions and air inlets of two sides. 3. The cooling water must be drained if the cooler is out of use for long time or before being transported. 4. To protect laser tubes , the radiator fan of cooler will suspend to work when water temperature is lower (about 10℃) , and it will restart to run when water temperature rises to higher (about 20℃). |
|||||||||||||||||||||||||||||||
| The first Installation It is very simple to install
this industrial cooling machine. The first time installation of the new machine
can be carried out by following steps.
1. Open the package to check if the machine is intact and all the necessary accessories are completed. 2. Open the injection port, then add cooling water. 3. According to system conditions, connect the water inlet and outlet pipe well. 4. Plug in power, turn on the power switch. (Do not allow the water overflow) 5. Check the water level of the water tank again. (It should be 80-150cm from the surface of water to the injection port) |
|||||||||||||||||||||||||||||||
 |
Maintenance 1. To ensure good heat dissipating, please open the lid to clean the dirt after the cooler used in long-term. 2. Working in cold north area, it is better to use noncorrosive antifreeze fluid. |
||||||||||||||||||||||||||||||
| Can be used for 40W / 50W /60W laser machine | |||||||||||||||||||||||||||||||
| Question and Answer： | |||||||||||||||||||||||||||||||
| Question：I installed water cooler attached to laser ，But there is a alarm noise.... | |||||||||||||||||||||||||||||||
| Answer: 1-Cold water machine filled with water. ( Pure water ,unadulterated water) |
|||||||||||||||||||||||||||||||
 |
|||||||||||||||||||||||||||||||
| 2-Connect the laser machine, inlet pipe and outlet
pipe. Don't wrong position!!!(Connection error will not be laser) |
|||||||||||||||||||||||||||||||
 |
|||||||||||||||||||||||||||||||
| 3-Turn on chiller power(110V),Chiller begins work,
You will find that the water level in the chiller has dropped, When the water level drops to a certain position The chiller will alarm, this is the need to add water, Because the water flows into the laser tube, |
|||||||||||||||||||||||||||||||
 |
|||||||||||||||||||||||||||||||
Recommends Accessories :  130002:
Industrial Water Chiller  130004:
Industrial Water Chiller  130022:
65W water pump
130021:
20W water pump
130056:
45W water pump
 Plastics
& Rubber |
|
 |
|
|
Shipping & Handling Details |
|
Default Shipping Cost or Free
Shipping Information: Handling Time: Shipping is usually made in 1-3 business days after payments cleared. Orders are processed from Monday-Friday; Not on the weekends & public holidays. Sales tax / Customs duties: Any sales taxes or Customs duties are not included. If came out, they must be undertaken by the buyer. Sales Tax of 8% will be applied for orders shipped within the state of California. Damage In Shipping: Email or call us First! We will work with you to get the case resolved in the fastest method. |
|
Return / Refund |
|
If you are not 100% happy with your purchase, please contact Us. Please don't directly opened a request or case without informing us, or else, we will do some discounts on the warranty and other sales-services later on. Hope for your understanding. Returns & Exchanges
▲ All
returns must be made within 14 days of delivery date. Items must be
in new, unused condition, with all original materials included
with the shipment. A partial refund may be applied for opened
or damaged items, depending on the condition.
Defective & Damaged Products |
|
Payment |
|
eCheck Issues: Payments
via eCheck do not clear immediately. Usually you will wait 5-7
days after checkout for it to clear. Then we will arrange
shipments for you.
|
|
Warranty & Feedback |
|
▲ 6
months' warranty for the machines, not for the consumables. We stand
behind our products all the item, so even if your warranty period
has expired, you can still seek for service or technical
support from us with low cost. ▲ Any warranty shipping cost to us is responsible by buyer. ▲ Any shipping cost to buyer is responsible by the seller. ▲ We committee to the customer satisfaction and want to bring you the best purchase experience. If there is any problems, please contact us ASAP. If not, please leave us a positive feedback as it's very important for us. Thanks very much. |