Product Details
Product Features:
1.90W high power, can make the soldering iron in 6 seconds to quickly warm up, fast tin, tin smooth, built-in thermostat chip, heat stability, with anti-scald protective cover
2. The iron can be precisely adjusted temperature, temperature range flexibility, up to 180 ℃ -480 ℃
3. Clear digital display: LED high-definition LCD screen display, more clearly display the temperature status, temperature gear at any time control
4. The use of thickened double-sided circuit board, heating to the specified temperature automatically stops heating, the use of the process of temperature drop in the chip induction will be heated again
5. Wide range of use: widely used in circuit board welding, home appliance repair, perfect for beginners, welders, basic household equipment, welding engineer training and so on.
1.90W high power, can make the soldering iron in 6 seconds to quickly warm up, fast tin, tin smooth, built-in thermostat chip, heat stability, with anti-scald protective cover
2. The iron can be precisely adjusted temperature, temperature range flexibility, up to 180 ℃ -480 ℃
3. Clear digital display: LED high-definition LCD screen display, more clearly display the temperature status, temperature gear at any time control
4. The use of thickened double-sided circuit board, heating to the specified temperature automatically stops heating, the use of the process of temperature drop in the chip induction will be heated again
5. Wide range of use: widely used in circuit board welding, home appliance repair, perfect for beginners, welders, basic household equipment, welding engineer training and so on.
Product features
1. The soldering iron working voltage adaptive AC220V
2. Power-on display “OFF” means off, press the “*” key for 2 seconds to power on.
3. After power on, press “+” or long press “a” to adjust the temperature, the adjustment range of 180 ℃ - 480 ℃.
4. Press “+” and “a” key at the same time to enter the temperature compensation adjustment, the adjustment range is earth 100 ℃/+180 F. The value is positive when the temperature increases, the negative value when the temperature decreases.
5. Quickly press the “*” key twice to switch the temperature unit.
6. Press “+” and “a” at the same time under the shutdown state to show the status of the hibernation switch, press the “+” key to open the hibernation function, press the “a” key to close the hibernation function. Press “+” key to turn on the hibernation function, and press “I” key to turn off the hibernation function. After the hibernation function is turned on, the handle without vibration operation for more than 10 minutes into the hibernation state, the iron does not heat up, display “----” and hibernation symbols, and then after 5 minutes there is still no operation will be shut down. When vibration is detected in the dormant state, it will resume normal operation immediately.
1. The soldering iron working voltage adaptive AC220V
2. Power-on display “OFF” means off, press the “*” key for 2 seconds to power on.
3. After power on, press “+” or long press “a” to adjust the temperature, the adjustment range of 180 ℃ - 480 ℃.
4. Press “+” and “a” key at the same time to enter the temperature compensation adjustment, the adjustment range is earth 100 ℃/+180 F. The value is positive when the temperature increases, the negative value when the temperature decreases.
5. Quickly press the “*” key twice to switch the temperature unit.
6. Press “+” and “a” at the same time under the shutdown state to show the status of the hibernation switch, press the “+” key to open the hibernation function, press the “a” key to close the hibernation function. Press “+” key to turn on the hibernation function, and press “I” key to turn off the hibernation function. After the hibernation function is turned on, the handle without vibration operation for more than 10 minutes into the hibernation state, the iron does not heat up, display “----” and hibernation symbols, and then after 5 minutes there is still no operation will be shut down. When vibration is detected in the dormant state, it will resume normal operation immediately.
Fault Code Description
E-1: Heating core resistance is too low or circuit failure.
H-E: Heating core disconnected
E-3: Power supply voltage too high (over 270V)
E-4: Power supply voltage is too low
E-1: Heating core resistance is too low or circuit failure.
H-E: Heating core disconnected
E-3: Power supply voltage too high (over 270V)
E-4: Power supply voltage is too low
Product Parameters:
Model: digital display intelligent soldering iron
Rated power: 90W
Temperature range: 180 ℃ -480 ℃
Heating mode: ceramic heating core
Soldering iron wire length: 120mm
Product length: about 230mm
Power plug: 2 plugs
Soldering time: about 6 seconds
Function:℃/℉ switching
Voltage:AC220V
Display:LED high definition liquid crystal screen
Function:Temperature adjustment
Model: digital display intelligent soldering iron
Rated power: 90W
Temperature range: 180 ℃ -480 ℃
Heating mode: ceramic heating core
Soldering iron wire length: 120mm
Product length: about 230mm
Power plug: 2 plugs
Soldering time: about 6 seconds
Function:℃/℉ switching
Voltage:AC220V
Display:LED high definition liquid crystal screen
Function:Temperature adjustment
Package Included:
Soldering iron*1
Accessory kit *1
Soldering iron*1
Accessory kit *1
- EBAY Managed Payment. But we only Accept your Ebay Address, please Make sure it's 100% right.
- Payment must be received in 5 business days of auction closing.
- Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order.
- Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.
1. We only ship to the confirmed address provided by eBay. please make sure your ebay address is 100% matches the address you would like us to ship to. If not, please let us know before we sent you the package, or we will not be responsible for any loss. hope you could understand.
2. Orders will be processed instantly and dispatched within 1-3 business days except hoilday, so we do NOT accept any email/message note after you place orders.
3. All package need to wait 30 days,Please take care it.Less than 30 days,we can't take a refund.
- All package need to wait 30 days(US only need 7-10 days),Please take care it.Less than 30 days,we can't take a refund.
- If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please keep in touch with us and double check the return address before you return it.
- If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.
We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important to us. We request that you keep in touch with us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.