Taurus PT111 G2, Millennium G2, G2, G2c, G2s, and original G3, or TX22 pistols Mount
Features:
1.This is the optic mount for the PT111 G2, Millennium G2, G2, G2c, G2s, and original G3, or TX22 pistols.
2. Made from stainless steel and then hard anodized to mil spec for longevity and scratch resistance.
3. Designed to replace your rear sight, no milling of the slide required.
4. Will work with thefollowing sight:RMR, VISM, MROS, JPoint, Shield Sight Reflex Mini Sight, Vortex Viper, Vortex Venom, ADE RD3 003, ADE RD3-006A, ADE RD3-006B, Docter/Noblex Sight C, Docter/Noblex sight 2+, Docter/Noblex sight III, Docter/Noblex QUICKsight 5.0 VR, Noblex Sight G, Burris Fastfire 2, Burris Fastfire 3, Delta Optical MiniDot, Delta Optical MiniDot II, Hawke Reflex 1×25, Sightmark Mini Shot Pro Spec, Sightmark Mini Shot M-Spec, Leica Tempus, MAKdot 1×25, Vector Optics SCRD-19II Frenzy 1x17x24, or Vomz Pilad 1×20 optics
Material: Stain Steel
• size: 48.8 * 28.7mm / 1.92*1.13inch
CZ 75B 85B 97B P-07 P-09 Mount
NOTE : Fit for : CZ 75B 85B 97B P-07 P-09
(Any red dot sight is not included)
Please refer to the base data(Mount interface size )
Mount interface size :
Width: 8.6mm/0.339 inch , 9.8mm/0.386 inch
Depth: 2.8mm/0.11 inch
Fit for red dot sight: Trijicon RMR /SRO, Vortex VENOM, Eotech MROS, Doctor Sight II Plus, Leupold DELTAPOINT, Burris Fastfire II&III
Universal GLOCK mount #1
Description about Universal Mount:
- Universal optics mount for most proliferated sites in the field
- Super low-profile
- Ability to use an optic without cutting your slide.
- Sleek solid steel construction
- The mount itself is secured to the slide via the dovetail with 6 set screws.
Product Spec:
Fits all Models Except 42/43
Length:1 7/8”
Width: 1 1/8”
Height: 1/8”
Weight: 1.3 oz (with mounting hardware)
Materials: aluminum
Notice: The pins for the RMR red dot only fit for the original RMR. But it can also install well on the replica RMR only with the screws
The glock mount is not fit all Glock gun.
If your gun has trapezoidal slot,this glock mount do not fit for your gun.You need This one Universal Mount .
Product installation:
- Depending on what optic you have you will need to find the screws that correlates with your particular optic. There are two special screws for Triji-con RMR. Once you secured the GUM to your slide and found the correct post ( two sets of reinforcing post included) for your optic, go ahead and mount your optic on the post and use the final two longer securing screws to secure your optic to the GUM.
- It is highly suggested that you have a gunsmith install the GUM and utilize the correct tools for installation.
- Leupold Delta Point* can be mounted but not with reinforced posts to secure 100%
UPDATE: We have confirmed compatibility with Vor-tex Ve-nom Red Dot sights
Universal GLOCK mount #2
This mount plate is proud to introduce a revolutionary new product The Universal (Optics) Mount for Glock.
It has the lowest height-over-bore mount in the industry without the hassle of cutting your slide or cost of buying an aftermarket slide!
This includes the Burris* Fast* Fire* II & III, Leupold* Delta Point* reflex sights, Docters* II & III, EoTech* MRDS*, Trijicon* RMR,*
Vortex Venom and Viper, and many others. The mount itself is secured to the slide via the dove tail with 6 set screws.
Two in the dovetail cut and one forward and aft of the dovetail and two more to prevent any shift. This provides a steady,
sturdy and rugged mount that will repeatedly hold zero.
Other mounting hardware included is 6mm, 8mm and 10mm screws (two of each) that are used to fit and secure most of the popular optics out there.
Depending on what optic you have you will need to find the screws that correlates with your particular optic.
There are two special screws for Trijicon RMR. Once you secured the GUM to your slide and found the correct post
( two sets of reinforcing post included) for your optic, go ahead and mount your optic on the post and use the final two longer securing screws to secure your optic to the GUM.
It is highly suggested that you have a gunsmith install the GUM and utilize the correct tools for installation.
Leupold Delta Point* can be mounted but not with reinforced posts to secure 100%
UPDATE: We have confirmed compatibility with Vortex Venom Red Dot sights
This mount plate can fit:G17/19/20/22/23/26/27/29/30/31/34/35/36/37/41
Fits all Models Except G21/42/43
FEATURES
-
Universal optics mount for most proliferated sites in the field
-
Super low-profile
-
Ability to use an optic without cutting your slide.
-
Sleek solid steel construction
-
The mount itself is secured to the slide via the dovetail with 6 set screws.
SPEC
Length: 48.7mm (1 7/8”)
Width: 28.5mm (1 1/8”)
Height: 3.36mm (1/8”)
Weight: 40g (1.3oz) (with mounting hardware)
Materials: steel
INCLUDED
1x Mount Plate
Mounting screws
