Explore the Aqara P2, a smart device with both infrared motion and light sensor, using the advanced Thread protocol. Featuring long-lasting dual CR2450 batteries with Aqara’s low-power technology, it ensures prolonged use. Compatible with the Matter ecosystem, the P2 enables diverse and rich automation scenarios, enhancing your smart home experience with precise control over lighting and more.
* The light sensor functionality may be unavailable with some Matter apps, such as Amazon Alexa.
** The detection angle and the sensitivity may vary depending on the ambient temperature and the distance.
*** Alert/security system function is not available in all the ecosystems (e.g., in Alexa it has a limited availability).
**** The local automation capabilities may vary depending on the Matter ecosystem the product is connected to. For the best possible experience, Aqara Home and Hub M3 are advised.
***** The battery life depends on the particular Matter ecosystem and the number of Matter ecosystems the device is connected to.
****** To connect the sensor to Aqara Home, the Hub M3 is required.
To add the P2 to a particular Matter-enabled app, your device or devices will need to have both functionalities, therefore a 2-in-1 Matter Controller & Thread Border Router is needed as a minimum requirement.
1. Granular light control for more comfort and energy saving
IF Motion is detected at the desktop, WHEN Every day from 18:00 to 23:00 , THEN Turn the desktop light on
Install the P2 in each zone of the room which is lit independently, and the lighting will follow you around the room: the desktop lights will be turned on right when you sit by your desktop, the bar counter strip will light up when you start making the drinks and more.
(Motion Sensor P2 + Hub M3 + Spotlight or LED Strip)
2. Use the Light Sensor for Energy Saving
IF Brightness exceeds 500 lux, WHEN The outdoor temperature is high, THEN Close the curtain
When the sun is too bright, the P2 will be able to help you to automatically close your curtains to prevent the sun from heating the room when it’s not needed and drastically save on cooling bills.
(Motion Sensor P2 + Climate Sensor + Hub M3 + Roller Shade Driver or Curtain Driver)
3. Fully automated light control based on motion and brightness
IF Motion is detected, WHEN Brightness is lower than 100 lux, THEN Set the Ceiling Light to Bright Cold White , THEN Turn on the Ceiling Light
You will be able to schedule different automations based on the brightness in the room to achieve circadian lighting and ambient control: the light will change its color temperature according to the time of the day and turn on or off only when it’s really needed.
(Motion Sensor P2 + Hub M3+ Ceiling Light T1M)
4. Local and Subscription-Free Security with Aqara Home
(Away Alert is Enabled in Aqara Home), IF Motion is detected, THEN Send a Critical Alert notification to smartphone, THEN Camera Hub G3 turns to the area where motion was detected and starts recording
Thanks to the Aqara Home Alert System, you will be able to automatically switch between Away, Home and Night modes, and take benefit from only receiving the relevant notifications and triggering other devices such as cameras for more peace of mind.
(Motion Sensor P2 + Hub M3 + Camera)