eBay

The remote only supports 433 mhz.

Please check whether your remote control is compatible before you buy it.

Feature:

【4 in 1 Remote Control Duplicator】— Duplicator is the easiest and least expensive way to copy any wireless remote, car key, garage door opener, and more!

【Multi-use】— The device can clone up to 4 remote buttons from the same or different remotes allowing you carry four remotes in one! Each corresponding letter (A, B, C, & D) can each open a different remote controlled key

【High Security】— You can open your garage door and unlock your car by using one remote control instead of carrying two keys with you The seamless infrared connection is secured and safe to use through data encryption You can copy any compatible wireless remote key and and each password is stored individually.

【Creative Design】— This gadget transfers signals to duplicate your existing remote controls so you always have a duplicate remote or key available in case you lose the original.

【Easy to Use】— Easy to copy and done within minutes Portable keychain design High frequency. current transistors are controlled separately to improve the power supply dynamics.

Specifications:

Working voltage: DC12V (27A battery inclued)
Operating Current: ≤ 8mA
Color: Black
Type: Auto Remote Control Duplicator
Material: Metal+Plastic
Working frequency: 433MHz
Modulation Mode: ASK (AM)
The transmission power: ≤ 100mW
Emission Distance: 100 m (proof)
The encoding type: self Copy
The working temperature: -10 ° C to +50 ° C
Application: garage doors, motorcycles, car alarm products, home security products, short-range wireless remote control products, industrial control products
Can be copied to the chip:
2260(all manufacturers) ,
2262(all manufacturers) ,
pT2264(all vendors) ,
5326(all manufacturers) ,
527(all manufacturers) ,
1527(all manufacturers) ,
2240(all vendors)
HT6026, HT6012, HT6014, HT600, HT680, HT6010, HT6207, HT640, HT6P12E, HT6P20D, 12L-4SC, PT2292,12L4SC, SC5262, PLC168, NF9420116, UM3750AM, SMC918, SMC908,1416,5211, HCS101, HCS200, HCS201, HCS300, HCS301(partial codes)

How to Program:

Step 1 –delete the existing code of our remote duplicator
1)Click and Hold A and B buttons together - Led will flash 3 times
2)Keep holding A button and release B button
3)Keep holding A button and push B button 3 times, Led will start flashing
Non-stop
Now press any key on the remote control, LED lights are not bright, so delete code success;
if you press the button LED lamp is lit, indicating that the original code is not deleted !
Step 2 - clone your original remote
1)Put both remotes Into back to Back position. Make sure they have direct-contact
2)Click and hold 1 button on your original remote and 1 button on your clone remote.
Keep holding until led will make 2 blinks then 3 blinks then goes into Steady and you have successfully cloned. ( the left keys follow the same above operation)
If for some reason the clone does not go further then 2 blinks , it means the signal does not go through,
please shift the remote slowly up and down until you get the point where it will go through.

Package:

4 x Remote Control Duplicator.