Tech Data: Thread Pitch: M14x1.5 · Lug Nut Height: 45 mm · Lug Nut Depth: 42 mm · Lug Nut Flange: 30 mm(1.18Inch) ? full specs below Fitment: Cadillac:
  • OPTIQ 25-Now
  • LYRIQ 23-Now
  • XT5 17-Now
  • Escalade ESV 03-Now
  • Escalade 99-Now
  • ESCALADE IQL Now-Now
  • VISTIQ Now-Now
  • XT6 20-25
  • SRX 10-16
  • Escalade EXT 02-13
IMPORTANT FITMENT NOTICE: Fit & Care: ? Compare with original nuts before ordering; match the cone seat ? Flange/body must clear the lug hole ? Stud must not exceed closed-nut depth ? Dually: 32 fasteners across four hubs - o? eBay's chart confirms thread pitch only ? unsure? Message us and we'll verify fitment before you buy.
ESPLUS
Precision wheel hardware
Exact specificationsThread, seat, size and quantity Fitment before claimsVehicle and wheel checks separated Listing-level termsShipping and returns stay current eBay message supportApplication context stays together
Lug Nuts
Mag Seat OEM Lug Nuts Duplex Conical OEM Lug Nuts Regular Acorn Lug Nuts Long Acorn Lug Nuts Open End Lug Nuts Spline Lug Nuts
Lug Bolts
Ball Seat Lug Bolts Cone Seat Lug Bolts
Wheel Locks
Locker Lug Nuts Locker Lug Bolts
Wheel Spacers
Hubcentric Spacer with Ball Seat Bolts Hubcentric Spacer with Cone Seat Bolts
Wheel Adapters
5 Lug Adapter 6 Lug Adapter 8 Lug Adapter 5 Lug Hubcentric Adapter 6 Lug Hubcentric Adapter
Precision wheel hardware · Fitment-first specification

OEM Style Bulge Acorn Lug Nuts

Cone Seat7/8 in Hex
30 mm flange with a closed-end body for matching original nut profiles

[24] Cadillac OE Style Black M14x1.5 Acorn Lug Nuts 1.8" Tall for Escalade XT5

Direct-fit upgrade for Cadillac owners ? confirm your exact year and model in the compatibility chart below before ordering. OEM Style Replacement Lug Nuts For Factory Alloy Wheels Direct Swap For Matching Originals
Fitment-first engineering [24] Cadillac OE Style Black M14x1.5 Acorn Lug Nuts 1.8
01 · Order scopeConfirm the exact quantity.Use the listing title and the technical data as the order reference, not the vehicle photograph.
02 · Vehicle sideConfirm thread and application.Read the compatibility section and every fitment note before ordering.
03 · Wheel sideConfirm the actual wheel hardware.Match seat geometry, diameter, clearance, depth and usable thread engagement.
Technical Data

Numbers, not adjectives.

Every dimension your wheel cares about ? measured, verified, documented.

M14x1.5 7/8" OEM Lug Nut

Type · OEM Style Lug Nut
×24 PCS/Set
Thread Pitch
M14x1.5
Lug Nut Height
45 mm
Lug Nut Depth
42 mm
Lug Nut Flange
30 mm(1.18Inch)
Lug Nut Seat
60 Degree Conical
Color and Finish
Black
Drive
7/8"
Tool Requirement
7/8" Hex Socket
Material Made
SCM Carbon Steel
Quantity Per Order
24 Pcs
California Prop 65 Warning
WARNING: This product can expose you to chemicals including Nickel and Lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Vehicle Compatibility

Fits your car.
Verified, not guessed.

OEM style bulge acorn lug nuts for factory alloy wheels with cone seat lug holes. The original nut profile, flange clearance and closed-nut depth must match.

1
Brands
10
Vehicles
3
Regions
NA

United States

1 Featured

Cadillac

United States · 10 models
Stock Alloy Wheel
Stock Steel Wheel
Aftermarket Wheel
Wheel with Cap
Model
Region
Year Range
ESCALADE IQL
MX
Current-Current
Escalade
US/MX/CA
1999-Current
Escalade ESV
US/MX/CA
2003-Current
Escalade EXT
US/MX
2002-2013
LYRIQ
MX
2023-Current
OPTIQ
MX/US
2025-Current
SRX
US/MX/CA
2010-2016
VISTIQ
Current-Current
XT5
MX/US
2017-Current
XT6
US
2020-2025

Not sure? Message us ? we verify your exact year & model before you buy.

Product Display

A closer look at the product.

Finish, geometry, and packaging — from every angle. Tap a thumbnail to view.

Close-up of black closed-end lug nuts, 7/8? hex, M14x1.5 thread, 45 mm tall, OEM cone seat, sold in sets of 24
Black closed-end lug nuts, 7/8? hex, M14x1.5 thread, 45 mm tall, OEM cone seat
Black closed-end lug nuts, 7/8? hex, M14x1.5 thread, 45 mm tall, OEM cone seat
Check Before You Order

Some fitment details only your vehicle can tell you.

The vehicle list above confirms your year, make and model. The points below are not part of that list — they depend on the wheels and hardware currently on your vehicle. Please verify them before ordering.

How to identify cone-seat lug nut fitment: 60-degree tapered seat, thread size, overall height and hex size
How to identify cone-seat lug nut fitment: 60-degree tapered seat, thread size, overall height and hex size
How to identify cone-seat lug nut fitment: 60-degree tapered seat, thread size, overall height and hex size
Why It's Built Different

Performance you can torque down.

Tapered Load Contact

The bulge acorn lug nut uses a cone seat to transfer clamping force through the matching tapered seating face of the wheel.

Solid Steel Load Path

The SCM Carbon Steel nut body carries clamping force from the stud threads to the wheel through a solid metal fastener.

Covered Stud Tips

The closed-end nut body covers the exposed stud tip for a finished wheel face when the stud fits within the nut depth.

Familiar Hand-Tool Access

The lug nut hex accepts a 7/8 in socket, providing a standard tool interface for wheel service.

How to Install

3 steps to torque.

Follow the sequence below ? fitment is everything, so read Step 1 carefully.

01

Match Original Nuts

Compare the original nuts with this listing. Confirm the cone seat, body clearance, height and closed-nut depth against the wheel and studs.

Stud length must not exceed the closed-nut depth.
02

Seat Wheel And Hand-Start

Clean the mating faces, seat the wheel flat and start each nut by hand. Snug evenly in a star pattern.

Stop if a nut binds or the wheel does not sit flat.
03

Torque With Hand Tools

Use the matching hex socket and a torque wrench. Tighten the wheel nuts in a star pattern to the vehicle specification.

Do not use an impact gun for final tightening.
Lug nut installation guide: hand-thread each nut, tighten in a star pattern, then torque to the vehicle specification
Lug nut installation guide: hand-thread each nut, tighten in a star pattern, then torque to the vehicle specification
Lug nut installation guide: hand-thread each nut, tighten in a star pattern, then torque to the vehicle specification
Lug nut installation guide: hand-thread each nut, tighten in a star pattern, then torque to the vehicle specification
01 / 4

Important Fitment Notice

Fit & Care:
  • Compare with original nuts before ordering; match the cone seat
  • Flange/body must clear the lug hole
  • Stud must not exceed closed-nut depth
  • Dually: 32 fasteners across four hubs - order by total count

eBay's compatibility list matches by vehicle only. The wheel-side facts above — seat geometry, hole clearance, installed depth and usable thread engagement — still need your own check. Message us through eBay before ordering if anything is unclear.

Why ESPLUS

Clarity before checkout.

Wheel hardware is fit-critical. Our listing structure keeps the evidence a buyer needs in the order it should be checked.

Specification First

Thread, seat, dimensions, finish and quantity are organized for direct comparison.

Fitment in Two Layers

Vehicle compatibility and wheel-specific hardware checks are presented separately.

Component-Level Detail

Combination listings keep each component's quantity, gallery and technical data distinct.

Pre-Purchase Support

Message us through eBay with your year, model, wheel and current hardware details.

Questions, answered

Check the details that decide fit.

Will this wheel hardware fit my exact vehicle?
Start with the vehicle compatibility section, then read every fitment note. Compatibility data does not replace wheel-side checks such as seat type, hardware dimensions, hole clearance and usable thread engagement.
How do I confirm thread pitch and seat type?
Compare one piece of your existing hardware with the technical data and the Check Before You Order images. Match the thread on the vehicle side and the seat geometry required by the wheel.
What should I verify on aftermarket wheels?
Confirm the wheel's seat profile, fastener-hole diameter, tool clearance, installed depth and required engagement. These wheel-specific facts are not established by year, make and model alone.
What torque specification should I use?
Use the vehicle or wheel manufacturer's applicable specification and installation procedure. If the two sources differ or the application is modified, consult a qualified installer before installation.
Where can I find current shipping and return terms?
Use the Shipping, delivery and Returns sections of this eBay listing as the current order-level terms. Those listing controls take priority over general informational text.
Shipping · Returns · Fitment

Order terms, kept current.

The controls attached to this eBay listing are the source of truth for the transaction.

Shipping

Review the handling time, delivery estimate and available services shown on this listing. Tracking is provided through the eBay order when available.

Returns

The return window, eligibility and conditions shown in this listing govern the order. Start any return request from the eBay purchase record.

Fitment Responsibility

Confirm the listed thread, seat, dimensions, clearance and quantity before installation. When uncertain, message us through eBay before ordering.

About ESPLUS

Precision wheel hardware.
Clarity built into every listing.

ESPLUS focuses on wheel fastening hardware and fitment-critical accessories. We organize product specifications, vehicle application data, wheel-side checks and installation guidance so buyers can compare the right facts before ordering.

Visit Our eBay Store
Store Home Feedback About Us Contact via eBay Follow Store
Copyright 2026 Eaglestart Supply Inc. · ESPLUS