*Fast Delivery from AU.
*Trusted Aussie Seller. Local Warehouse Warranty.

Description:

Radiator For Holden Rodeo RA 3.5L 3.0TD 03-07 / Isuzu D-Max 3.0L Diesel 07-12 AT

Fitment:

For Holden Rodeo RA series 03/2003 - 06/2008

For Isuzu D-MAX 06/2008 - onwards

For Holden Colorado RC 2008-2012

For 2.4L Petrol, 3.5L Petrol, and 3.0 Turbo Diesel 

(NOT for 3.6L Petrol V6 which uses a crossflow radiator)

Specification:

Type: Radiator 

WITH CAP

Direct Replacement  
Top quality Aftermarket part

Transmission: Manual / Automatic

Aluminum Core Size : 475*588*16 mm

Tank Size: 613*47.5-16 mm

Material: Mechanical Aluminium & Plastic

Warranty: 2 Years

Package:

1  x Radiator

Note:

Please check the picture & diagram Before purchase,  as there are more than two types of radiators could fitthis model! 

Professional installation is recommended!  

Please double check the vehicle’s original part number before purchasing this part.

If you are not sure if this is the correct part, please contact us with the vehicle’s 17 digit VIN. In most cases, we can usually determine which part is the correct one for your vehicle by performing a VIN search.

How to replace a new radiator?

1. Disconnect the battery.

2. Drain the radiator fluid into a suitable container.

3. Remove the old radiator:

-Take off any plastic covers around the radiator.

-Disconnect the electrical connector to the fan, and unbolt and remove the fan assembly.

-Disconnect the radiator hoses from the radiator.

-Disconnect the transmission cooling lines from the bottom of the radiator.

-Remove any clamps, brackets, or screws holding the radiator inside its frame.

-Lift the radiator up and out of the car.

4. Install the new radiator:

-Slide the new radiator into place.

-Connect any clamps or brackets that hold the radiator in place.

-Connect the transmission cooling lines carefully.

-Connect the engine cooling hoses to the radiator.

-Replace the fan and fan shroud.

-Reconnect the fan electrical connection.

-Replace the plastic covers.

5. Fill the radiator with fluid.

6. Check your work to make sure that there are no leaks.

(Tools need to be prepared: Screwdrivers, Wrenches, Drain pan)

Note:Do please keep children and pets away when replacing the radiator)