CalAmp 4G/LTE/3G Cat 1 GPS Tracker w/ Wi-Fi and BT | TTU3640LAW-Q000-G1000 | AT&T

Overview

Form Factor: Fleet/asset tracker

Technology: 4G LTE Cat 1 with 3G fallback

Frequency:

4G: Band 2, 4, 5, 12 (1900/1700–2100/850/700 MHz)

3G: Band 5, 2 (850/1900 MHz)

Carrier: AT&T

Features: Internal antenna

The TTU-3640™ is a next generation trailer tracking product that includes a range of wireless and peripheral connectivity options and is equipped with CalAmp's purpose-built vehicle interface technologies for both light-duty and heavy-duty vehicles.

Competitive technology, competitive edge

The TTU-3640™ is designed to support enterprise customers requiring a full set of fleet features with cellular, Wi-Fi, and Bluetooth connectivity options to LTE networks, plus a triple-axis accelerometer that detects and acts on hard braking, aggressive acceleration, or vehicle impacts. Messages are transported across the cellular network using enhanced SMS, UDP, or TCP messaging, providing a reliable communications link between the device and your application servers. The built-in ECU (Engine Control Unit) interface reads and transmits engine condition and performance data such as engine temperature and fault codes from both light-duty and heavy-duty vehicles to provide the best possible real-time picture of vehicle health.

Smart vehicle technology

The TTU-3640™ employs CalAmp's industry-leading on-board alert engine, PEG™ (Programmable Event Generator). This advanced engine monitors external conditions and supports customer-defined, expectation-based rules to help meet the needs of your application. PEG continuously monitors the vehicle environment and responds instananeously to pre-defined threshold conditions related to time, date, motion, location, geo-zone, input, and other event combinations. With PEG™, your unique application will meet demanding customer requirements. This behavior can be programmed by CalAmp before shipment at a customer's facility, or over-the-air once the unit has been fielded

Over-the-air serviceability

The TTU-3640™ also leverages CalAmp's management and maintenance system, PULS™ (Programming, Updates, and Logistics System), for over-the-air configuration parameters, PEG™ rules and fireware. This out-of-box, hands-free configuration and automatic post-installation upgrades can monitor unit health status across your fleets to identify issues before they become expensive problems.

Experience the advantage

4G LTE Cat-1 network technology

Optional Bluetooth or Wi-Fi and Bluetooth connectivity

Integrates both light-duty and heavy-duty vehicle ECU interfaces

Two serial ports with switched power

High-performance internal antennas

Up to 32 built-in geo-fences, plus any combination of circle or polygon zones, up to 5,400 points

IP-67 sealed enclosure

Automatic, over-the-air configuration and firmware download

MDT-7P Tablet, Magellan, Garmin, TomTom and other advanced peripherals are supported

5,200 mAh battery

Specifications

TTU-3640-LTE-ATT-BT-WiFi

CalAmp

178.7 mm × 86.1 mm × 55.9 mm (7.04 in. × 3.39 in. × 2.2 in.)

On Power: –30 °C to 60 °C (–22 °F to 140 °F)

On Battery: –10 °C to 60 °C (14 °F to 140 °F)

Charging: 0 °C to 45 °C (32 °F to 113 °F)

Storing: –20 °C to 25 °C (–4 °F to 77 °F)

CalAmp LMU/TTU-3600 Series

GPS Tracker

Tracker: Fleet/Asset

4G LTE Cat 1 with Fallback

Band 1 (2100 MHz)

AT&T

North America

Hardwired with Backup Battery

Internal Antenna

4G LTE: Band 2, 4, 5, 12 (1900/1700–2100/850/700 MHz)

3G: Band 2, 5 (1900/850 MHz)

32-bit

9 V to 32 V DC

Vehicle Bus, 5× Inputs, 3× Outputs, ADC, 1× Wire Bus, 2× Serial

34-Pin 2.5 mm Pitch Sealed

Internal Antenna

Proprietary

Yes

CE (EEA), FCC (US), IC (CA)

AT&T, PTCRB