• How To Installation Crankshaft Position Sensor
  •  
  • The crankshaft position sensor is usually installed on the front end of the crankshaft;the front end of the camshaft;
  •  
  • the side of the flywheel or in the distributor.
  •  
  • Function of crankshaft position sensor
  •  
  • The engine speed signal is generated to determine the basic fuel injection quantity and ignition advance angle;
  •  
  • The crankshaft reference position signal (upper dead center signal of a cylinder) is generated and the crankshaft rotation angle is calculated;
  •  
  • Generate engine crankshaft angle signal and determine crankshaft (or piston) position;
  •  
  • Crankshaft Position Sensor For Ford Ranger Mercury Topaz Mazda B2300 1989-1994

    How To Installation Crankshaft Position Sensor

     

    The crankshaft position sensor is usually installed on the front end of the crankshaft;the front end of the camshaft;

     

    the side of the flywheel or in the distributor.

     

    Function of crankshaft position sensor

     

    The engine speed signal is generated to determine the basic fuel injection quantity and ignition advance angle;

     

    The crankshaft reference position signal (upper dead center signal of a cylinder) is generated and the crankshaft rotation angle is calculated;

     

    Generate engine crankshaft angle signal and determine crankshaft (or piston) position;

     

     

     

     

    • Type : Crankshaft Position Sensor
    •  
    • Brand :X-engineclub
    •  
    • Fitment Type :Direct Replacement
    •  
    • Non-Domestic Product :No
    •  
    • Surface Finish: New
    •  
    • Condition??High Quality and Test Working Well before Shipping
    •  
    • How To Ensure That You Are Buying The Correct Part:1.Enter complete Year;Make;Model;Trim;and Engine Size in eBay Compatibility Chart.2.Please feel free to contact with us when not sure.
    •  
    • 3 Year Warranty;This item is backed by 3 Year Warranty. In the event this item should fail due to manufacturing defects

      during intended use, we will replace the part free of charge  for the original Purchaser.

     

     

    Interchange Part Number:F0TZ6C315B F0TZ6C315C F0TZ6C35X F1TZ6C35X F27E6C315BA F27E6C351BA F4ZZ6C35X

     

    Other Part Number: 16259721 ZZM018370 ZZM067082  213-2360 SS10121 71-4915

     

    Packaged Included:1PC  Crankshaft Position Sensor

     

     

                     

    Ford (9) 1989-1994:
    Mustang (3) 1991-1993:
    1991 L4-140cid 2.3L FI VIN M  1 per Vehicle

    1992 L4-140cid 2.3L FI VIN M  1 per Vehicle

    1993 L4-140cid 2.3L FI VIN M  1 per Vehicle
    Ranger (6) 1989-1994:
    1989 L4-140cid 2.3L FI VIN A Distributorless  1 per Vehicle

    1990 L4-140cid 2.3L FI VIN A Distributorless  1 per Vehicle

    1991 L4-140cid 2.3L FI VIN A Distributorless  1 per Vehicle

    1992 L4-140cid 2.3L FI VIN A Distributorless  1 per Vehicle

    1993 L4-140cid 2.3L FI VIN A Distributorless  1 per Vehicle

    1994 L4-140cid 2.3L FI VIN A Distributorless  1 per Vehicle


    Mazda (1) 1994-1994:
    B2300 (1) 1994-1994:
    1994 L4-2295cc 2.3L FI VIN A 1 per Vehicle

     


    Item Specifics
    Brand Speedyautoparts
    Items Included As the picture
    Type Crankshaft Position Sensor
    Number in Pack As the picture show
    Manufacturer Part Number SP102792ECB
    Color Black
    Manufacturer Warranty 1 Year
    Universal Fitment NO
    Interchange Part Number ZZM018370 213-2360 SS10121 71-4915
    Connector Type Plug In
    Other Part Number F1TZ6C351A F27E6C315BA F0TZ6C315B,F0TZ6C351A
    Weight 0.13 LB
    Feature Sensor system
    Non-Domestic Product No
    OE Spec or Performance/Custom OE Spec
    Packaging New in Box
    Terminal Gender Male
    Connector Shape TRIANGULAR
    Connector Gender Female
    Dimension 5.2x3.6x2(in)
    Notes Just like the picture, Professional installation required
    Package Content 1pc
    Terminal Quantity 3
    nterchange Part Number F27E6C315BA,PC10, F4ZZ-6C351A, ZZM0-18-370
    Terminal Gender Male
    Mount Hole Quantity 1
    Connector Quantity 1
    Interchange Part Number F27E6C315BA,PC10, F4ZZ-6C351A, ZZM0-18-370
    Weight 5 OZ
    Other Part Number PC10 147-212 CSS409 CKP2001 96096
    Bundle Listing No
    Terminal Type Blade
    Connector Gender Female
    Terminal Gender Male
    Superseded Part Number SPCFD001, 71-4915 5S1744 SS10121 22167
    Cross Part Number 213-2360 SU221, 180-0364 F27E 6C351 BA F27E-6C315BA

    Payment

    We accept multiple payment methods

    Shipping

    We offer international shipping through eBay global shipping program.We reserve the right to change shipping carrier and shipping method for efficient and on-time deliveries. Our store is not responsible for carrier delays such as weather or natural disasters.

    Returns

    All returns must be approved with a Return Material Authorization Number (RMA #) that must be included with the return

    To receive an RMA Please contact Our Customer Service.

    All returned products will be inspected. Returns processing may take up to 3 business days from the time your product is received at our return facility locations.

    Contact Us

    Often, Customers reach out to us to help confirm fitment of parts prior to purchase.
    We always recommend cross referencing a part number to ensure fitment as well.

    You may Contact Us by locating the "Contact Seller" Button within a listing.

    Feedback

    We maintain high standards of excellence and strive for hundred percent customer satisfaction. Feedback is very important to us. We hope that you contact us immediately before you give neutral or negative feedback, so that we can address your concerns. It is impossible to address issues if we do not know about them!

    Help & Info
    Payment Policy
    Shipping Policy
    Return Policy
    FAQ
    About Us
    Crankshaft Position Sensor For Ford Ranger Mercury Topaz Mazda B2300 1989-1994

    How To Installation Crankshaft Position Sensor

     

    The crankshaft position sensor is usually installed on the front end of the crankshaft;the front end of the camshaft;

     

    the side of the flywheel or in the distributor.

     

    Function of crankshaft position sensor

     

    The engine speed signal is generated to determine the basic fuel injection quantity and ignition advance angle;

     

    The crankshaft reference position signal (upper dead center signal of a cylinder) is generated and the crankshaft rotation angle is calculated;

     

    Generate engine crankshaft angle signal and determine crankshaft (or piston) position;

     

     

     

     

    • Type : Crankshaft Position Sensor
    •  
    • Brand :X-engineclub
    •  
    • Fitment Type :Direct Replacement
    •  
    • Non-Domestic Product :No
    •  
    • Surface Finish: New
    •  
    • Condition??High Quality and Test Working Well before Shipping
    •  
    • How To Ensure That You Are Buying The Correct Part:1.Enter complete Year;Make;Model;Trim;and Engine Size in eBay Compatibility Chart.2.Please feel free to contact with us when not sure.
    •  
    • 3 Year Warranty;This item is backed by 3 Year Warranty. In the event this item should fail due to manufacturing defects

      during intended use, we will replace the part free of charge  for the original Purchaser.

     

     

    Interchange Part Number:F0TZ6C315B F0TZ6C315C F0TZ6C35X F1TZ6C35X F27E6C315BA F27E6C351BA F4ZZ6C35X

     

    Other Part Number: 16259721 ZZM018370 ZZM067082  213-2360 SS10121 71-4915

     

    Packaged Included:1PC  Crankshaft Position Sensor

     

     

                     

    Ford (9) 1989-1994:
    Mustang (3) 1991-1993:
    1991 L4-140cid 2.3L FI VIN M  1 per Vehicle

    1992 L4-140cid 2.3L FI VIN M  1 per Vehicle

    1993 L4-140cid 2.3L FI VIN M  1 per Vehicle
    Ranger (6) 1989-1994:
    1989 L4-140cid 2.3L FI VIN A Distributorless  1 per Vehicle

    1990 L4-140cid 2.3L FI VIN A Distributorless  1 per Vehicle

    1991 L4-140cid 2.3L FI VIN A Distributorless  1 per Vehicle

    1992 L4-140cid 2.3L FI VIN A Distributorless  1 per Vehicle

    1993 L4-140cid 2.3L FI VIN A Distributorless  1 per Vehicle

    1994 L4-140cid 2.3L FI VIN A Distributorless  1 per Vehicle


    Mazda (1) 1994-1994:
    B2300 (1) 1994-1994:
    1994 L4-2295cc 2.3L FI VIN A 1 per Vehicle

     

    Item Specifics
    Brand :Speedyautoparts
    Items Included :As the picture
    Type :Crankshaft Position Sensor
    Number in Pack :As the picture show
    Manufacturer Part Number :SP102792ECB
    Color :Black
    Manufacturer Warranty :1 Year
    Universal Fitment :NO
    Interchange Part Number :ZZM018370 213-2360 SS10121 71-4915
    Connector Type :Plug In
    Other Part Number :F1TZ6C351A F27E6C315BA F0TZ6C315B,F0TZ6C351A
    Weight :0.13 LB
    Feature :Sensor system
    Non-Domestic Product :No
    OE Spec or Performance/Custom :OE Spec
    Packaging :New in Box
    Terminal Gender :Male
    Connector Shape :TRIANGULAR
    Connector Gender :Female
    Dimension :5.2x3.6x2(in)
    Notes :Just like the picture, Professional installation required
    Package Content :1pc
    Terminal Quantity :3
    nterchange Part Number :F27E6C315BA,PC10, F4ZZ-6C351A, ZZM0-18-370
    Terminal Gender :Male
    Mount Hole Quantity :1
    Connector Quantity :1
    Interchange Part Number :F27E6C315BA,PC10, F4ZZ-6C351A, ZZM0-18-370
    Weight :5 OZ
    Other Part Number :PC10 147-212 CSS409 CKP2001 96096
    Bundle Listing :No
    Terminal Type :Blade
    Connector Gender :Female
    Terminal Gender :Male
    Superseded Part Number : SPCFD001, 71-4915 5S1744 SS10121 22167
    Cross Part Number : 213-2360 SU221, 180-0364 F27E 6C351 BA F27E-6C315BA


    We accept multiple payment methods

    We offer international shipping through eBay global shipping program.We reserve the right to change shipping carrier and shipping method for efficient and on-time deliveries. Our store is not responsible for carrier delays such as weather or natural disasters.

    All returns must be approved with a Return Material Authorization Number (RMA #) that must be included with the return

    To receive an RMA Please contact Our Customer Service.

    All returned products will be inspected. Returns processing may take up to 3 business days from the time your product is received at our return facility locations.

    Often, Customers reach out to us to help confirm fitment of parts prior to purchase.
    We always recommend cross referencing a part number to ensure fitment as well.

    You may Contact Us by locating the "Contact Seller" Button within a listing.

    We maintain high standards of excellence and strive for hundred percent customer satisfaction. Feedback is very important to us. We hope that you contact us immediately before you give neutral or negative feedback, so that we can address your concerns. It is impossible to address issues if we do not know about them!


    All rights reserved.