Descriptions:
-Low offset voltage: 25μV(MAX), G ≥ 100
-Low drift: 0.1μV/°°C, G ≥ 100
-Low noise: 50nV/√Hz, G ≥ 100
-High common mode rejection ratio (CMRR): 100dB(MIN), G≥10
-Low input bias current: 200pA(MAX )
-Low quiescent current: 50μA.
Input Voltage: (V), (V), (V), (V) Input Voltage: (V-)+0.1V to (V+)-0.1V.
ouXin Elet
-Output voltage: (V-)+0.05V to (V+)-0.05V.
-Operating Temperature Range: -40°C to +125°C
-Inputs filtered for radio frequency interference (RFI)
-Power supply range: 1.8V to 5.5V (single supply), ±0.9V to ±2.75V (dual supply)
Applications.
Bridge amplifiers, electrocardiogram (ECG) amplifiers, pressure sensors, medical instruments, portable instruments,
Thermocouple Amplifiers, Resistance Temperature Detector (RTD) Sensor Amplifiers, Data Acquisition
Description
This module on-board 3.3V low-dropout LDO regulator chip directly to the INA333 amplifier power supply, the amplifier uses a single-ended power supply method, V- and GND.
The amplifier adopts single-ended power supply mode, V- is connected to GND, and V+ is connected to the 3.3V output of LDO, which means the amplifier adopts 3.3V single-ended power supply mode.
VIN+ is the in-phase input and VIN- is the in-phase input. R3 on the board is not soldered.VCC regulates the input 5V of the LDO.
-Low drift: 0.1μV/°°C, G ≥ 100
-Low noise: 50nV/√Hz, G ≥ 100
-High common mode rejection ratio (CMRR): 100dB(MIN), G≥10
-Low input bias current: 200pA(MAX )
-Low quiescent current: 50μA.
Input Voltage: (V), (V), (V), (V) Input Voltage: (V-)+0.1V to (V+)-0.1V.
ouXin Elet
-Output voltage: (V-)+0.05V to (V+)-0.05V.
-Operating Temperature Range: -40°C to +125°C
-Inputs filtered for radio frequency interference (RFI)
-Power supply range: 1.8V to 5.5V (single supply), ±0.9V to ±2.75V (dual supply)
Applications.
Bridge amplifiers, electrocardiogram (ECG) amplifiers, pressure sensors, medical instruments, portable instruments,
Thermocouple Amplifiers, Resistance Temperature Detector (RTD) Sensor Amplifiers, Data Acquisition
Description
This module on-board 3.3V low-dropout LDO regulator chip directly to the INA333 amplifier power supply, the amplifier uses a single-ended power supply method, V- and GND.
The amplifier adopts single-ended power supply mode, V- is connected to GND, and V+ is connected to the 3.3V output of LDO, which means the amplifier adopts 3.3V single-ended power supply mode.
VIN+ is the in-phase input and VIN- is the in-phase input. R3 on the board is not soldered.VCC regulates the input 5V of the LDO.
Package include: According to your choice.
Payment:
PayPal, PayPal Credit, MasterCard, Apple Pay, Google Pay...are all supported.
Shipping:
Please make sure your address 100% right.
Return Policy:
If you are not satisfied with the item,any problem,please contact with us before you give a negative feedback,because it doesn't help you at all.we will try our best to help you solve the problems.
Feedback:
Your satisfaction is very important for us.If you are satisfied with our item or service,please give us a positive feedback and 5-Star DSRs rating.
Contact Us:
We are very glad to help you,please feel free to contact us whatever any problems.Due to high volume of daily incoming emails and time zone difference,please allow 24 hours for us to reply.
About Item:
For the funcitonal products in our shop,we make sure that the functions are the same as description,but the actual color and shape may looks a little different from pictures because of the technical improvement and manufacturing variance.Please be advised before you bid.
