Note:if you choose “only E600LFP ”, it means that you will only receive an E600LFP without solar panel,

           only if you choose “E600LFP+200W KIT”, you will only receive E600LFP and 200W solar panel.

1111`

Feature:

  • Best Companion for short Vacation:E600 LFP Portable Power Power With a larger capacity of 614Wh and a higher power rating of 1200W, this is perfect for camping, hiking, fishing and other short trips.
  • Multi Outputs,More Options:Featuring 3 x pure sine wave AC outlets,1x12V Car;2x12V DC5525;2xUSB-C;2xUSB-A;1xWireless Charging Pad, E600 LFP can power most of appliances under 1200W.
  • Upgraded LiFePO4 battery:The E600 LFP features a long-lasting LiFePO4 battery (3500+ life cycle to 80%) and a built-in BMS that protects your equipment from over-load, over-current, short-circuit, over-temperature, etc.
  • Get Fast and Safe Recharge:The E600LFP has three charging methods, including AC (home) charging, DC (vehicle) charging,and PV (solar) charging.E600 LFP adopts a MPPT charge controller that support a maximum 400W solar input,allowing you to fully recharge within 2.5 hours.
  • Warranty Time:12-Month Worry-Free Warranty (ONLY applicable to portable power station). Within 30 days after purchase, non-human damage can be replacement and repaired free of charge; after 30 days to 12 months (Repair only, no returns or replacement), buyer has to pay the shipping cost to send the product to our warehouse. We will pay for the cost of repair or replacement parts and labor, after the product is repaired, we will send it back to the buyer for free,thanks.

 

 

E600LFP Specification:

  • Brand: Pecron
  • Power: 1200W
  • Capacity: 614Wh(25.6V/24AH)
  • Battery Type: LiFePO4 (3500+ Cycles to 80%)
  • AC Adapter Input: 100Vac~120Vac; Output: 42V?7A
  • Solar Input: Voc 12V~18V/100W Max/7A Max;Voc 32V~95V/400W Max/15A Max
  • Car Input: DC 12V~18V-100W  Max
  • AC Output: 120Vac/60Hz/1200Watts
  • DC Output: 1x12V Car;2x12V DC5525;2xUSB-C;2xUSB-A;1xWireless Charging Pad
  • USB Output: 1x100W PD,3x18W
  • Wireless Charging Pad: 15W Max.
  • Charge Temperature: 0°C~45°C/32°F-113°F
  • Discharge Temperature: -20°C~45°C/-4°F-113°F
  • Weight: About 9.4KG/About 20lbs
  • Dimensions: L298xW198xH215mm?L11.7xW7.8xH8.5in
 
 
 
 200WSpecification:
  • Model : 200W solar panel
  • Cell Type : Monocrystalline
  • Nominal Power :200W±5%
  • Operating Voltage : 38.8±5%
  • Operating Current : 5.24A±5%
  • Open Circuit Voltage (Voc) : 48.9V±5%
  • Short Circuit Current (Isc) : 5.66A±5%
  • Cell Efficiency ≥23%
  • Working Temperature : -20°C~+60°C
  • Waterproof grade : IP67
  • Dimension (Unfolded) : 597*610*42mm/23.5*24*1.7in
  • Dimension (Folded) : 2220*610*27mm/87.4*24*1.1in
  • Weight : 6.2kg/13.7lb
 

 

 Package:
  • 1*Pecron E600 LFP power station
  • 1*Solar charging cable
  • 1*Anderson solar charging cable
  • 1*Car charging cable
  • 1*AC Charger
  • 1*User Manual
  • 1*200W Solal Panel (ONLY KIT INCLUDED)
 
 
 
FAQS:

Q1: What kind of battery is used in E600 LFP? How long it can last?

A:E600 LFP utilizes high quality UL certified automotive LiFePO4 battery, it can retain 80% of its original capacity at 3500 complete charge cycles.

Q2:What devices can E600 LFP power?

A:The AC output ports can power appliances which use less than 1200 watts of electricity. However, inductive types of loads such as freezer, fridge, compressor, motor require a much higher power to start (approx. 3-7 time lager than itsrated power).The DC output ports can supply a maximum DC power of 120W(12V/10A).

Q3:Can the E600 LFP be charged while discharging?

A:Yes, E600 LFP can run devices while it is being charged. The battery will eventually run out if the discharging is greater than the charging during the pass through charging.

Q4:How to calculate the E600 LFP running time?

A:Running Time=Total Capacity(614Wh) * 0.85 (Depth of Discharge)/Loading Power(Watts)

Q5:Can I use the E600 LFP indoors and charge the E600 LFP indoors?

A:Yes, the E600 LFP is safe to use indoors.

Q6:Does E600 LFP have built-in MPPT controller?

A:Yes, E600 LFP has a built-in MPPT charge controller, which supports 12V-18V(max 100W) or 32V-95V(max 400W)PV input.

PushAuction