One Working Day Dispatch Via Tracked Service
Rustins Quick Drying MDF Primer is a water based primer for use on indoor and outdoor work. Used as a primer, it is suitable for new and bare MDF. It has high opacity and can be used as an undercoat on primed or painted surfaces. This primer may be over-coated with water or solvent based finishing paints.
Colours: White
Sizes: 250ml /500ml
Coverage: Approximately 13m² per litre, 1 coat, depending on the absorbency of the surface.
Directions For Use:
Preparation:
Surfaces to be coated must be clean, dry and free from wax, grease and contaminants. When priming bare wood, knots must be sealed with Rustin’s Knotting. Fill holes and cracks with Rustin’s Wood Fillerafter priming. As an undercoat over existing paint, the surface must be cleaned and lightly sanded to provide a key before application.
Application:
Apply liberally and evenly with a synthetic fibre brush or roller. For brush application, if needed, the primer coat may be thinned by mixing 5 parts with 1 part water. Do not thin when applying as an undercoat. Coats: A minimum of 2 coats are required. Drying Time Touch dry within 30 minutes, depending on temperature and humidity.
Re-coating Time: 2 hours minimum, depending on temperature and humidity.
Application Temp. Ideally 15-25°C. Do not use below 10°C or in conditions of high humidity.