Walthers Trainline 910-20433 | EMD GP9 - ESU(R) DCC & Sound - CN 4013 | HO Scale

PRODUCT DESCRIPTION

PLEASE NOTE: When operating Walthers-branded DCC-equipped locomotives in DC mode, do not use powerpacks that exceed an 18V rating. This includes MRC 1300-series powerpacks, which have known issues with our decoders.
 
WalthersMainline Phase II Chopped Nose GP9 is a must-have model for your 1960s and later diesel roster! Outwardly similar to the earlier GP7, and sharing the same boxy, no frills body with its high, short hood, minor production changes in the number and placement of louvers on locomotives built from 1955 to 1957 resulted in what modelers and railfans refer to as "phase two" GP9s. In the 1960s, many roads began rebuilding their GP9s as an affordable alternative to new equipment, and many were refitted with chopped short hoods to improve forward visibility. Like it's prototypes, many are still going strong today and the WalthersMainline Phase II GP9 with chopped nose is perfect power for any assignment and features:
  • One time run of these roadnumbers - order now, limiyted quantity available!
  • Detailed body with chopped nose
  • Based on Phase II units rebuilt in the 1960s by many owners
  • Scale width hood with correct contours
  • With or without dynamic brakes as appropriate
  • See-through steps
  • Correct RP-25 metal wheels
  • Available with ESU Sound and DCC for DCC or DC layouts featuring:
    • 4 function outputs with brightness control by CV
    • Fully DCC compatible
    • 14, 28 or 128 speed steps
    • Dual mode DC and DCC
    • 4 Airhorns changeable by CVs
    • 2 bells changeable by CVs
    • Full 8-notch prime mover sounds
    • Compressor
    • Dynamic brake
  • Same powerful drive as WalthersProto(R) locos featuring:
    • Five-pole skew-wound motor
    • 14 to 1 gear ratio
    • Helical-cut gears for quiet operation and easy multiple unit operation
    • All-wheel drive and electrical pickup
    • Machined brass flywheel
    • Heavy die-cast metal chassis
    • Constant and directional LED headlights
    • 21-pin DCC plug
    • Molded drill starter points - add grab irons to your model easily with the GP9 Phase II Diesel Detail Kit (#910-258 sold separately)
    Alternate Horns and Bells include: Horns: CV163 = 0 - Leslie A-200 (default) CV163 = 1 - Wabco Single Chime CV163 = 2 - Leslie S3L CV163 = 3 - Nathan M5
     
    Bells: CV164 = 0 - EMD Brass Bell (default) CV164 = 1 - EMD Steel Bell
PLEASE NOTE: When operating Walthers-branded DCC-equipped locomotives in DC mode, do not use powerpacks that exceed an 18V rating. This includes MRC 1300-series powerpacks, which have known issues with our decoders. WalthersMainline Phase II Chopped Nose GP9 is a must-have model for your 1960s and later diesel roster! Outwardly similar to the earlier GP7, and sharing the same boxy, no frills body with its high, short hood, minor production changes in the number and placement of louvers on locomotives built from 1955 to 1957 resulted in what modelers and railfans refer to as "phase two" GP9s. In the 1960s, many roads began rebuilding their GP9s as an affordable alternative to new equipment, and many were refitted with chopped short hoods to improve forward visibility. Like it's prototypes, many are still going strong today and the WalthersMainline Phase II GP9 with chopped nose is perfect power for any assignment and features:One time run of these roadnumbers - order now, limiyted quantity available!Detailed body with chopped noseBased on Phase II units rebuilt in the 1960s by many ownersScale width hood with correct contoursWith or without dynamic brakes as appropriateSee-through stepsCorrect RP-25 metal wheelsAvailable with ESU Sound and DCC for DCC or DC layouts featuring:4 function outputs with brightness control by CVFully DCC compatible14, 28 or 128 speed stepsDual mode DC and DCC4 Airhorns changeable by CVs2 bells changeable by CVsFull 8-notch prime mover soundsCompressorDynamic brakeSame powerful drive as WalthersProto(R) locos featuring:Five-pole skew-wound motor14 to 1 gear ratioHelical-cut gears for quiet operation and easy multiple unit operationAll-wheel drive and electrical pickupMachined brass flywheelHeavy die-cast metal chassisConstant and directional LED headlights21-pin DCC plugMolded drill starter points - add grab irons to your model easily with the GP9 Phase II Diesel Detail Kit (#910-258 sold separately)Alternate Horns and Bells include: Horns: CV163 = 0 - Leslie A-200 (default) CV163 = 1 - Wabco Single Chime CV163 = 2 - Leslie S3L CV163 = 3 - Nathan M5 Bells: CV164 = 0 - EMD Brass Bell (default) CV164 = 1 - EMD Steel Bell

Specifications

  • Assembly Status Ready to Go/Pre-built
  • MPN 910-20433
  • Grade C-10 Mint-Brand New
  • Scale 1:87
  • Year Manufactured 2023
  • Control System Digital
  • Road Number 4013
  • Gauge HO
  • Brand Walthers
  • Type Diesel Locomotive
  • Rail System Two-Rail System
  • Corporate Roadname Canadian National
  • Theme Transportation
  • Features DCC fitted, Light Function, Painted, Sound Function
  • UPC 616374201440

Squeaky’s Trains & Things LLC was founded in December of 2019.   It was started by our family that has been in love with everything, trains large and small, driven by creativity since we were born.  We grew up playing with model trains and watching, learning about and studying different aspects of magnificent locomotives on a daily basis and today we still do.

It also has helped us get through rough times while dealing with being diagnosed on the autism spectrum.  Trains and creativity have always helped calm our daily lives while also becoming self-taught on making designs and artwork. 

With this our family activity that grew into a really big hobby!  We realized local train stores were barely available and we also wanted to start offering other model railroading fans our self-made creations for their enjoyment.   We want to help the community around us by providing model railroad supplies and continue the legend of the greatest hobby on earth, model trains and railroading! 

We accept payment by PayPal and Credit / Debit cards entered on eBay only. You must be registered with PayPal or eBay to buy from us.

We ship via USPS and UPS based on the destination. Order tracking information will be provided once the item has shipped. Delivery estimate is typically 1-3 days for domestic shipments. Shipping fee's are calculated at the time of purchase, we combine shipping to save you money if you purchase multiple products.

Import duties, taxes, and charges aren't included in the item price or postage cost. These charges are the buyer's responsibility.  Please check with your country's customs office to determine what these additional costs will be, prior to bidding or buying.

We accept domestic returns within 30 days per Ebay policies. To be eligible for a full refund, your item must be in the same condition that you received it, unopened, unworn or unuséd and in its original packaging. There may be up to a 20% restocking fee on the return if the product has been opened or uséd.

SoundTraxx products may be returned as opened and uséd product within 30 days without a restocking fee.

We can be contacted at any time through eBay messages if you have any questions, comments or product requests. We will respond to you within 24 hours and do our best to help you out! We encourage our customers to contact us with any questions or concerns! We'd like to be sure you are completely satisfied with your purchase.

WHAT OUR CUSTOMERS ARE SAYING

Fast shipping! Thank you! A+++++++++++++++++++++++ hdjunky (1586 )
Excellent! Fast shipping and great packing! machinetoolnut (1024 )
Fast delivery trainblues (1361 )
Arrived in good condition. longwolf81 (319 )
Well packaged and arrived on time. I thought the foam would be a bit more firmer to hold the trains, but the product works as described. cruzer200 (91 )
eBay integration by