Description:
1.3-in-1 Digital TDS meter can provide accurate readings of TDS EC and temperature.2. TDS instrument has automatic temperature compensation in measurement mode.
3.can automatic shutdown. Save power and extend battery life.
4. Multi mode conversion: there are 4 different modes for TDS EC instrument. Press shift to switch between different modes.
Parameters:
Material: ABS
Battery type: 3V (CR2032) button battery [low battery or digital display incomplete can replace the battery, pay attention to the positive and negative poles do not install the reverse].
TDS test range: 0~9999PPM
Conductivity test range: O~999OUS/CM
Material: ABS plastic/gold alloy probe
Celsius degree：0.1-80℃
Fahrenheit degree: 32-176℉
Accuracy: ‡2%
Influencing factors: Water temperature: TDS pen cannot be used to measure high temperature water (e.g. hot boiled water)
Water flow rate: TDS pen can not be used to measure the water body of large shaking
Waterproof rating: not waterproof
Function: Can be used for TDS value test, conductivity test, temperature test
There are 4 modes are: TDS temperature, EC temperature, TDS Fahrenheit, EC Fahrenheit, the lower right corner is the temperature display
Water quality tester size: 15.5cm*3cm*1.5cm
Weight: 45g
Usage:
①Remove the battery protection cover before use;
② Press the on/off key, put the electrode into the solution to be measured (note that the solution should not be higher than the sinking line);
③When the value is stable, press the HOLD key and take out the reading;
④After using, press the key to switch off the instrument, the instrument will be turned off, the electrode will be wiped clean and put into the electrode protective cover.
There is no memory function, press the switch will be restored to the first interface, HOLD has a locking function; when backlight automatically off, 10s after the automatic shutdown].
Packing list:
1 X 3-in-1 tester pan
