• Fit For:
    • 1998-2002 Chevy Camaro Z28
     
  • Package Includes:
    • Pair Headlight Assembly Left + Right
     
  • Features:
    • Plug and Play Operation, Direct Bolt-On OE Fitment or Replacement for the Stock Unit
    • Comes with a Complete Set of Headlights (Driver and Passenger Side)
    • Brings a Different Appearance to Vehicle thats Great for Show Use or to Replace Old and Worn Headlights
    • Requires no Modification or Drilling
     
  • Note:

    • For Chevy Camaro 1998-2002 Headlights Assembly Pair Replacement Chrome Housing

    Fit For:

    • 1998-2002 Chevy Camaro Z28

     

    Package Includes:

    • Pair Headlight Assembly Left + Right

     

    Features:

    • Plug and Play Operation, Direct Bolt-On OE Fitment or Replacement for the Stock Unit
    • Comes with a Complete Set of Headlights (Driver and Passenger Side)
    • Brings a Different Appearance to Vehicle thats Great for Show Use or to Replace Old and Worn Headlights
    • Requires no Modification or Drilling

     

    Note:

    • High quality lights.Safety and Durable.
    • DOT/SAT approved for street legal. Safety & Fashion.
    • High grade ABS plastic. For toughness, impact resistance, and heat resistance.
    • Condition: 100% Brand New and High Quality
    • Material: ABS Plastic Housing / Polycarbonate Lens
    • 100% Brand New!
    • Professional Installation is Highly Recommended.
    • Installation Instruction is NOT Included.

     

    Installation:
    Install:

    • Undo the screws, clips, or retainer springs that hold the headlight in place.
    • Disconnect the wiring from the assembly.
    • Detach the headlight from the vehicle to replace it with a new one.
    • Fit in the new headlight assembly.
    • Fix the new headlight into place and make sure that the screws, clips, or retainer springs used are sealed.
    • Reconnect the wiring that was unplugged from the assembly.
    • Put back the grille and other components that you removed. Seal them back into place.
    • Test the new assembly.

     

    Adjust：

    • Before you begin to adjust the light, make sure check the alignment of your lights first. Park the vehicle about 10 to 25 feet from the wall with the lights aimed at the wall. The centerlines of the headlights should not be any higher than 3.5 feet above the ground.
    • 【Find the adjustment screws】Firstly, locate the adjustment screws on your vehicle.
    • 【Adjust the headlights individually】The headlights should be adjusted one at a time. Put a rag or towel over a chair in front of the light you want to block. Covering the light assembly directly can damage the plastic lens.
    • 【Adjust the vertical field】The screw on the top of the light housing should be turned clockwise to raise the lights and counterclockwise will lower the light. The headlight should be adjusted until the top of the most intense part of the light beam shines directly on or just below the center of the tape line on the wall.
    • 【Adjust the horizontal field】The screw on the side of the light housing should be turned to get the right/left adjustment correct. Adjust the lens so that the most intense part of the beam is to the right of the vertical line.
    • 【Test your results】

     

    Brand New and High-quality：

    • Waterproof:The whole sealing construction can prevent moisture from entering the inside of housing.
    • Dust proof:The full sealed design will prevent the ingress of rain, dust and other foreign matter.
    • Heat Dissipation:With efficient heat dissipation, the construction of headlight will be protected and its useful life will be extended.
       

     


    Item Specifics
    Brand hilamps
    Manufacturer Part Number 11380777
    Manufacturer Warranty 1 Year
    Universal Fitment No
    Vintage Part No
    Placement on Vehicle Rear Right Left
    Headlights Design Factory Style
    Housing Color Black
    Lens Color Clear
    Interchange Part Number 15218077,15218078
    Superseded Part Number 15199561,15199560
    Lighting Technology Halogen
    Bulbs Included No
    Headlight Style Reflector
    Bulb Shape Code High Beam 9005
    Fitment Type Direct Replacement
    Certifications DOT SAE
    Assembly Type Sealed
    Mounting Hardware Included No
    Water Proof Yes
    Components Included Lens and Housing
    Lens Material Plastic

    Payment
    1.We accept any payment which can be accepted by eBay.
     
    2.Please do check the shipping address. If you want to change the shipping address, please contact us by eBay messages.
     
    3.If you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.
     
    4.Payment must be received within 10 days as auction ended or order might be delayed.
    Shipping
    1. Orders processed within 24 hours of payment verification. (if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.)
     
    2. The images shown are not the actual item and are for your reference only.
     
    3. Fast shipping: All our packages use USPS First Class/UPS/Fedex... Package Service
     
    4. If you have not received your shipment within 15 days from payment , please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction!
    Returns
    1. You have 30 days to contact us and 10 days to return it from the date it was received. If this item is in your possession more than 7 days, it is considered used and we will not issue you a refund or replacement. There are NO EXCEPTIONS!
     
    2. All returned items must be in the original packaging and you must provide us with the shipping tracking number, specific reason for the return, and item custom lable.
     
    3. We will refund your full winning bid amount, upon receipt of the item in its original condition and packaging with all components and accessories included, AFTER both Buyer and Seller cancel the transaction from eBay. OR, you may choose to have a replacement.
     
    4. Return shipping is to be paid by the Buyer.
    Feedback
    1. We maintain high standards of excellence (five stars review)and strive for 100% customer satisfaction! FEEDBACK IS VERY IMPORTANT TO US. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
     
    2. It is impossible to address issues if we do not know about them!

    Shop Category
     Store Home
     Towing Mirrors
     Sensors
     Cooling System
     Air Conditioning System
     Lamps
     Truck Bed Accessories
     CV Axle Shaft
     Alternator
     Coolant Overflow Tank
     Brake pads
     Steering Shaft
     Windshield Wiper Motor
     Strut Assemblies
     Door Handle
     Wheel Hub Bearing Assembly
     Wheel Adapters
     Window Switch
     Bumpers
     Window Regulator
     Compressor
     Window Visor
     Drive shaft
     CDI BOX
     Other
    Hot Item
    Delivery

    content_src_url

    New List Item
    Help & Info
    Payment Policy
    Shipping Policy
    Return Policy
    FAQ
    About Us
    For Chevy Camaro 1998-2002 Headlights Assembly Pair Replacement Chrome Housing

    Fit For:

    • 1998-2002 Chevy Camaro Z28

     

    Package Includes:

    • Pair Headlight Assembly Left + Right

     

    Features:

    • Plug and Play Operation, Direct Bolt-On OE Fitment or Replacement for the Stock Unit
    • Comes with a Complete Set of Headlights (Driver and Passenger Side)
    • Brings a Different Appearance to Vehicle thats Great for Show Use or to Replace Old and Worn Headlights
    • Requires no Modification or Drilling

     

    Note:

    • High quality lights.Safety and Durable.
    • DOT/SAT approved for street legal. Safety & Fashion.
    • High grade ABS plastic. For toughness, impact resistance, and heat resistance.
    • Condition: 100% Brand New and High Quality
    • Material: ABS Plastic Housing / Polycarbonate Lens
    • 100% Brand New!
    • Professional Installation is Highly Recommended.
    • Installation Instruction is NOT Included.

     

    Installation:
    Install:

    • Undo the screws, clips, or retainer springs that hold the headlight in place.
    • Disconnect the wiring from the assembly.
    • Detach the headlight from the vehicle to replace it with a new one.
    • Fit in the new headlight assembly.
    • Fix the new headlight into place and make sure that the screws, clips, or retainer springs used are sealed.
    • Reconnect the wiring that was unplugged from the assembly.
    • Put back the grille and other components that you removed. Seal them back into place.
    • Test the new assembly.

     

    Adjust：

    • Before you begin to adjust the light, make sure check the alignment of your lights first. Park the vehicle about 10 to 25 feet from the wall with the lights aimed at the wall. The centerlines of the headlights should not be any higher than 3.5 feet above the ground.
    • 【Find the adjustment screws】Firstly, locate the adjustment screws on your vehicle.
    • 【Adjust the headlights individually】The headlights should be adjusted one at a time. Put a rag or towel over a chair in front of the light you want to block. Covering the light assembly directly can damage the plastic lens.
    • 【Adjust the vertical field】The screw on the top of the light housing should be turned clockwise to raise the lights and counterclockwise will lower the light. The headlight should be adjusted until the top of the most intense part of the light beam shines directly on or just below the center of the tape line on the wall.
    • 【Adjust the horizontal field】The screw on the side of the light housing should be turned to get the right/left adjustment correct. Adjust the lens so that the most intense part of the beam is to the right of the vertical line.
    • 【Test your results】

     

    Brand New and High-quality：

    • Waterproof:The whole sealing construction can prevent moisture from entering the inside of housing.
    • Dust proof:The full sealed design will prevent the ingress of rain, dust and other foreign matter.
    • Heat Dissipation:With efficient heat dissipation, the construction of headlight will be protected and its useful life will be extended.
       

     



    1.We accept any payment which can be accepted by eBay.
     
    2.Please do check the shipping address. If you want to change the shipping address, please contact us by eBay messages.
     
    3.If you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.
     
    4.Payment must be received within 10 days as auction ended or order might be delayed.
    1. Orders processed within 24 hours of payment verification. (if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.)
     
    2. The images shown are not the actual item and are for your reference only.
     
    3. Fast shipping: All our packages use USPS First Class/UPS/Fedex... Package Service
     
    4. If you have not received your shipment within 15 days from payment , please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction!
    1. You have 30 days to contact us and 10 days to return it from the date it was received. If this item is in your possession more than 7 days, it is considered used and we will not issue you a refund or replacement. There are NO EXCEPTIONS!
     
    2. All returned items must be in the original packaging and you must provide us with the shipping tracking number, specific reason for the return, and item custom lable.
     
    3. We will refund your full winning bid amount, upon receipt of the item in its original condition and packaging with all components and accessories included, AFTER both Buyer and Seller cancel the transaction from eBay. OR, you may choose to have a replacement.
     
    4. Return shipping is to be paid by the Buyer.
    1. We maintain high standards of excellence (five stars review)and strive for 100% customer satisfaction! FEEDBACK IS VERY IMPORTANT TO US. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
     
    2. It is impossible to address issues if we do not know about them!

    hilamps_All rights reserved.