This decoder is a T6 decoder with built in Keep-Alive™, and will keep your locomotive operating for 6-15 seconds without power (As a result of dirty track, poor contacts, etc.). This decoder is physically larger than a T-series decoder, but features the same operational characteristics. This decoder is compatible with any locomotive which uses the JST-9 interface.

 

Keep-Alive®: Included on-board for smooth, stutter-free operation.
 

Back EMF Load Compensation: Provides superior slow speed control and high performance under load.
 

Quiet Drive: Super-quiet motor control for "buzz" free motor performance.
 

DC Mode: Decoder will automatically detect DC power. You can also configure how your lighting effects function on DC.
 

Variable Momentum: Allows you to make custom acceleration and deceleration curves.
 

Incandescent Bulb Support: This decoder can be used with 12 Volt bulbs.
 

Function Remapping: Buttons 0 through 12 may be used to control the lighting functions of this decoder.
 

Programmable Lighting Effects: Choose from 20 separate user-programmable lighting effects!
 

Dimmable Brightness: Configure multiple different brightness levels for your LED's or incandescent bulbs.
 

Decoder Lock: Feature which prevents accidental/unwanted programming while activated.
 

Airwire™ Compatible: Fully compatible with Airwire™ operation.
 

User-Loadable Speed Tables: Configure custom speed curves and set speed limits.

SPECS:

Interface Type:  Hard-Wire

Direct-Plug (9-Pin JST)

 

Dimensions (L x W x H): 1.315" x 0.65" x 0.35" or 33.4mm x 16.5mm x 8.9mm

 

Scale: HO Scale

 

Continuous/Peak: 1.0/2.0 Amp

 

Total Functions: 6

 

Function Rating: 100 mA

 

12V Outputs: 6